Acoustic emission parametric analysis to investigate the damage evolution of anchor systems designed by the concrete capacity design method
Fahim Mumand,Yonemori Hikaru,Hitoshi Moriyama,Mitsuhiro Shigeishi
DOI: https://doi.org/10.1617/s11527-022-01914-y
2022-03-01
Materials and Structures
Abstract:The Acoustic Emission (AE) phenomenon is extensively studied for beams, columns and bridges. A breadth of literature is available interpreting the AE activity to monitor the structural health of elements and materials, quantify their damage, and predict failure. However, there is few information on its applicability and limitations regarding the Concrete Capacity Design (CCD) method of designing anchorage to concrete, which lies at the core of all the design practices. A cast-in anchorage to concrete under tensile force was designed as per the stipulations of CCD and parametric analyses of the AE signal, recorded during the pulling-out of the anchor rod, were conducted through pull-out tests. The damage was evaluated from the pull-out stiffness variation and the work done by the tensile force. The AE b-value, relaxation ratio, calm ratio, and load ratio analyses were performed to investigate suggestive trends regarding the damage and loading conditions. At load levels close to failure, the stiffness decline was accompanied by an increase in work done calculated by the load versus pull-out displacement. The Kaiser effect existed at load cycles lower than the concrete breakout strength and the b-value was also lower than one. The histogram of damage quantification, standardized by the Japanese Society of Nondestructive Inspection (JSNDI), was developed to determine the damage and establish boundaries among the damage levels. The relaxation ratio also implied damage occurring because of dominant AE activity during unloading when the applied load was more than the concrete breakout strength. It was found that complete unloading is necessary to obtain correct results with relaxation ratio. AE was found promising to investigate the behavior of anchor systems with few discrepancies.
construction & building technology,materials science, multidisciplinary,engineering, civil