Abstract:Freeze casting is a promising approach for assembling lamellar metal-ceramic composites with an exceptional combination of strength and toughness. Although these mechanical properties can be optimized by regulating the microstructure of porous ceramic structures, the effect of lamellar thickness is rarely mentioned, especially for B4C/Al composites. Herein, by controlling the freezing temperature, we used freeze casting to create nacre-like B4C scaffolds with identical ceramic content yet different lamellar thicknesses and then infiltrated them with 2024Al alloy. The effects of lamellar thickness on the damage-tolerance behavior and toughening mechanisms are discussed. The refinement of lamellae decreases the probability of observing catastrophic flaws in ceramic layers, increasing strength from 534 ± 14 to 578 ± 15 MPa and increasing crack-initiation toughness (KIc) from 9.2 ± 0.6 to 11.4 ± 0.2 MPa m1/2. These composites exhibit higher damage tolerance resulting from several toughening mechanisms, such as plastic deformation, crack deflection and blunting, and the uncracked-ligament bridging of ductile metal layers, which is reflected in the stable crack propagation during fracture and rising R-curve behavior. Importantly, coarsening of the structure of composites allows the fracture behaviors transform from single to multiple crack propagation, thus absorbing much more fracture energy, with the valid crack-growth toughness (KJc) enhancing markedly from 17.1 ± 2.4 to 29.8 ± 2.3 MPa m1/2.

Efficient Multiscale Strategy for Toughening HfB2 Ceramics: A Heterogeneous Ceramic–metal Layered Architecture

Efficient multiscale strategy for toughening HfB 2 ceramics: A heterogeneous ceramic–metal layered architecture

Novel strong and tough Ta/TaHfC 2 composites with multi‐scale laminated structure

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic

Hierarchically Structured Ceramic Coatings Based on Zirconia and Magnesium Oxide with High Toughness

High toughness and R-curve behaviour of laminated SiC/graphite ceramics

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Integrated preparation of B4C–TiB2 multilayer graded ceramics with high hardness and high toughness

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

Synergistic Toughening Effect of SiC Whiskers and Particles in ZrO2–Al2O3–SiC Ceramics

Hardness and toughness improvement of SiC‐based ceramics with the addition of (Hf 0.2 Mo 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )B 2

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Structural Evolution and Mechanical Behavior of Ytterbia Doped Hafnia Biphasic Ceramics under Annealing at 1500 °C

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

Toughening Ceramic-Based Composites by Homogenizing the Lattice Strain at Phase Boundaries.

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

High damage-tolerance bio-inspired B4C/2024Al composites with adjustable mechanical performance by tuning ceramic thickness

Microstructure and Mechanical Properties of HfC-SiC Ceramics Influenced by WC Addition

Toughness and R-curve behaviour of laminated Si3N4/SiCw ceramics

Improvement of mechanical properties of Al2O3/Ti3SiC2 multilayer ceramics by adding SiC whiskers into Al2O3 layers

Dual-grained Mo2FeB2-based cermets containing WC fabricated via multi-step sintering approach: Microstructure, mechanical properties and interface characteristics