Abstract:The present work characterizes mechanical (elastic and plastic) properties and residual stresses of a Ni-Co thin film having 10 m thickness. Mechanical properties are obtained from direct-tension testing together with elastic finite element analysis. Membrane and bending components of residual stresses are measured using micro-cantilever and T-structure tests, respectively. Introduction Measurement of residual stresses in thin films is quite important, as their effect on mechanical integrity of micro-electrical-mechanical components could be significant. A number of measurement methods are available [1-7], but a majority of methods deal with measuring averaged residual stresses, rather than thickness-variation of residual stresses in thin films. Although such thickness variation could be often insignificant due to the fact that the thickness is very small, residual stresses can vary along the thickness of thin films. Measuring thickness variations of residual stresses, however, are not straightforward. A sectioning method can be applied (see for instance Ref. [7]), but can be quite tedious. In this respect, a simple method to measure thickness variations is desirable. In designing (macroscopic) structures, a stresses categorization process from stresses in the thickness direction is popularly employed [8-10]. In the stresses categorization process, stresses in the thickness direction are decomposed into the primary, secondary and peak stresses. Primary stresses are ones resulting mechanical loads and dead weights. Secondary stresses include thermal and residual stresses. Both primary and secondary stresses are typically idealized as a sum of (constant) membrane and (linear) bending stress components. Remaining stresses are classified as the peak stress, which relaxes quickly with plastic deformation by definition. A message that can be learnt from conventional stresses categorization process is that determination of membrane and bending components of residual stresses would be sufficient from mechanical integrity point of view. This paper presents measurement of residual stresses in Ni-Co thin films. A linearly-varying residual stress across the film thickness is assumed. To measure its bending and membrane components, cantilever beam and T-structure beam specimens are used, respectively. Experiments Material and Specimen Fabrication A NiCo thin film is recently widely used for MEMS devices using LIGA processes. Fabrication processes of NiCo thin film specimens are schematically shown in Fig. 1. For tensile test, conventional “dogbone” tensile test specimens were fabricated. Furthermore, for residual stress analysis, specimens of T-type structure and cantilever beams (which will be discussed later in this paper) with various dimensions were also fabricated. A single-side

Residual Stress Of Tini Shape Memory Alloy Thin Films On Silicon Substrate

Effects of residual stress on the isothermal tensile behavior of nanocrystalline superelastic NiTi shape memory alloy

Film thickness effect on texture and residual stress sign transition in sputtered TiN thin films

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Influence of Residual Stress on Mechanical Properties of TiAlN Thin Films

Effect of Temperature on Residual Stress and Mechanical Properties of Ti Films Prepared by Both Ion Implantation and Ion Beam Assisted Deposition

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

On the Lower Thickness Boundary of Sputtered Tini Films for Shape Memory Application

Preparation and Annealing of Sputtered NiTi Shape Memory Thin Films

The Behavior of Crystalline Grain Growth in TiNi Shape Memory Alloy Thin Films

MECHANICAL PROPERTIES OF NiTi SHAPE MEMORY THIN FILMS

In-situ observation of transition between surface relief and wrinkling in thin film shape memory alloys.

Laser Annealing of Amorphous Ni-Ti Shape Memory Alloy Thin Films

Microstructure, residual stress, and fracture of sputtered TiN films

Evolution of Surface Morphology in Tinicu Shape Memory Thin Films

Tini Film Based Shape Memory Alloy and Microactuators

Technique of TiNi-based shape memory alloy thin film coated on optical fibers

Mechanical Evaluation of Selective Laser Melted Ni-Rich NiTi: Compression, Tension, and Torsion

Characterization of Mechanical Properties and Residual Stresses for Ni-Co Thin Films

Grain size dependence of stress-assisted two-way memory effect in Ti-50.04 at.% Ni shape memory alloy

Thermal Stability of Cu-Al-Ni Shape Memory Alloy Thin Films Obtained by Nanometer Multilayer Deposition