Abstract:MgNi-based alloys have been regarded as very promising anode material for nickel-metal hydride battery owing to their electrochemcial capacity much higher than that of AB(5) alloys. However, Mg-Ni alloy anodes generally suffer very serious capacity decay in cycling, which is previously ascribed to the corrosion of Mg in alkali electrolyte in the past decades. To further reveal the capacity fading mechanism of MgNi-based alloys, the electrochemcial hydrogen storage properties of Mg2Ni and amorphous Mg50Ni50 alloys and their microstructural evolution during cycling were comparatively studied. It has been firstly demonstrated that it is the amorphous MgNi phase instead of Mg2Ni phase contributes to electrochemical discharge capacity, because the Mg2NiH4 hardly released hydrogen under electrochemcial conditions. Then, it has been found that the charge input level has significant effect on the cyclic performance of amorphous Mg50Ni50 alloy anode. At full charge of 500 mAh g(-1), the amorphous MgNi phase easily crystallized to the nanocrystalline Mg2NiH4, which leaded to the capacity decay immediately. Comparatively, with the low charge input of 100 mAh g(-1), the discharge capacity of amorphous Mg50Ni50 alloy remained almost unchanged for 425 cycles. The excellent cyclability is attributed to the less hydrogenation-induced crystallization at low charge input. This work clearly demonstrates that the hydrogenation-induced crystallization is a dominating reason for the electrochemical capacity decay in the milled amorphous Mg-Ni anode. It provides a new approach to improve the electrochemcial properties of Mg-Ni alloy electrode by inhibiting the hydrogenation-induced crystallization. (C) 2019 Elsevier Ltd. All rights reserved.

Surface Modification Of Amorphous Mgni Electrodes

Effects of Surface Modification on the Electrode Behavior of Amorphous CeMg12 Alloys

Effects of Surface Coating on the Electrochemical Properties of Amorphous CeMg12 Composite

Effects of Surface Modification on the Electrode Behavior of Ball-Milled La2Mg17 + 200 Wt% Ni Composite in Alkaline Solution

The Relation Between the Discharge Capacity and Cycling Number of Mechanically Alloyed MgxNi100−x Amorphous Electrode Alloys

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

A study of the degradation of the electrochemical capacity of amorphous Mg50Ni50 alloy

Surface Coating of NCM-811 Cathode Materials with G-C3n4 for Enhanced Electrochemical Performance.

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Electrochemical Hydrogen Discharge Properties of MgNi-Carbon Nanotube Composites

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

Surface Modification and Preparation Technique for La_(1- X) Ce_x (nicomnal)_5 Hydrogen Storage Alloy Electrode

Improvement of Electrochemical Performance and Thermal Stability by Reducing Residual Lithium Hydroxide on LiNi0.8Co0.1Mn0.1O2 Active Material using Amorphous Carbon Coating

Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 by Surface Modification with Graphene-Like Lithium-Active MoS2

Preparation and Discharge Properties of Amorphous Mg_(65-x)Ni_(21)Pr_(14) Agx Alloy Electrodes

New Surface Modification for La_(1-x) Ce_x(NiCoMnAl)_5 Hydrogen Storage Alloys: KBH_4 Alkaline Aqueous Solution-Hot Charging Treatment

Improving the Electrochemical Performance of Li-rich Li1.2Ni0.2Mn0.6O2 by Using Ni-Mn Oxide Surface Modification

Effects of Surface Modification on Electrochemical Performance of Mno2

Reinforcing electrochemical performance of Ni‐rich NCM cathode co‐modified by mg‐doping and Li3PO4‐coating