Abstract:Contact mechanics modeling and mechanical mechanism analysis of defects in automated fiber placement. The layup quality of prepreg fibers onto complex surfaces is the most concerned issue in automated fiber placement (AFP), which is intimately related to the contact stress in tractive rolling contact. An analytical model of tractive rolling contact is proposed in this paper to clarify the defects mechanism during the AFP process, which considers the mold curvatures, mechanical properties of contacted objects, and pose information to make it suitable for irregular surfaces and arbitrary conditions. Classical Hertz theory in this model is expanded to 3D contact area, and multi‐scale deformations are united in the accurate calculation of contact stress under geometric constraints. Based on the model, the phenomena of adhesion, microslip, and the transition between them in AFP are systematically analyzed. For engineering applications, a discrete processing strategy is proposed to quickly obtain the local curvatures of the mold. Additionally, an algorithm is designed to calculate the contact stress of any path. Experimental results on an aircraft component demonstrate the accuracy of the proposed model in restoring the contact stress distribution during AFP. In conjunction with specific layup information, this model exhibits utility in forecasting laying defects and parameter optimization. Highlights An analytical modeling approach based on Hertz theory is proposed to calculate the contact stress in automated fiber placement. A model‐based algorithm is designed and combined with the proposed discrete scheme to quickly restore the contact stress distribution. Contact states related to stress are systematically investigated and defects analysis based on computational mechanics results is illustrated.

Experimental Study on Relationship Between Processing Parameters and Stress Wave Propagation During Automated Fiber Placement Process

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Process-dependent Wrinkle Formation for Steered Tow During Automated Fiber Placement: Modeling and Experimental Verification

Experimental Study of the Effect of Internal Defects on Stress Waves during Automated Fiber Placement

Influences of Wrinkles Induced by Tows’ Offset in Automated Fiber Placement on the Bending Properties of Composites

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

Automated Fiber Placement Path Planning and Analysis of Pressure Vessels

Placement suitability analysis of automated fiber placement on curved surfaces considering the influence of prepreg tow, roller and AFP machine

Modeling of contact mechanics and defects investigation in automated fiber placement

Modelling the Effect of Process Conditions on Steering-Induced Defects in Automated Fibre Placement (AFP)

Multiscale collaborative process optimization method for automated fiber placement

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Real-time in-situ process monitoring method based on the self-conductivity of carbon fiber prepreg for automated fiber placement (AFP)

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness

Numerical and experimental study of the viscosity and mechanical parameters effect on tow feeding quality during automated fiber placement

Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates

The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process

Experimental Study on the Influence of Optimised Automated Fibre Placement Processing Parameters on the Impact Response and Residual Flexural Strength of AS4/APC-2 Laminates