Abstract:Characterization and analysis process of fracture toughness of in situ consolidation thermoplastic composite materials with automated fiber placement under different placement pressures. This study delved into the Mode I fracture behavior of laser‐assisted automated fiber placement (AFP) in situ consolidated thermoplastic composite laminates under different curing pressures. In compliance with ASTM D5528 standards, T700 carbon fiber reinforced polyether ether ketone (T700‐CF/PEEK) double cantilever beam (DCB) specimens were fabricated and segregated into three test groups subjected to distinct roller pressures: DCB‐100N, DCB‐500N, and DCB‐1500N. The fracture toughness of these specimens was then inversely characterized by employing an optimized ASTM‐based data reduction methodology. A kind of tri‐linear cohesive zone model (CZM) incorporating the fracture process zone (FPZ) length was developed to simulate delamination behavior, showing good agreement between experimental results and simulation predictions. Compared with the other two test groups, DCB‐1500N specimens have more inter‐laminar bridging fibers and higher propagated toughness. Although the length of fiber bridging area is shorter, the fiber bridging density is higher, so the influence of fiber bridging on toughness is more pronounced in the DCB‐1500N specimens. This study provides theoretical guidance for the impact resistance design of thermoplastic composites (TPCs), offering valuable insights into the intrinsic relationship between material processing and fracture damage mechanisms. Highlights Explore the characteristic interlaminar fracture behavior of thermoplastic laminates made by AFP under different curing pressures. Develop a more accurate tri‐linear CZM model to describe the plastic deformation at crack tips and fiber bridging during the delamination process. Unveil the intrinsic relationship between AFP curing pressure and ductile fracture mechanism of thermoplastic composites.

Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness

Experimental Study on the Influence of Optimised Automated Fibre Placement Processing Parameters on the Impact Response and Residual Flexural Strength of AS4/APC-2 Laminates

Study on Mode I interlaminar fracture behavior of automated fiber placement in situ consolidation thermoplastic composite considering the influence of roller compaction pressure

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Understanding Processing Parameter Effects for Carbon Fibre Reinforced Thermoplastic Composites Manufactured by Laser-Assisted Automated Fibre Placement (AFP)

Optimization of Process-Induced Residual Stresses in Automated Manufacturing of Thermoset Composites

Multi-pass Layup Process for Thermoplastic Composites Using Robotic Fiber Placement

Optimization of Process Parameters for Robotic Fibre Placement

An Approach for Damage Initiation and Propagation in Metal and Carbon Fiber Hybrid Composites Manufactured by Robotic Fiber Placement

Modelling the Effect of Process Conditions on Steering-Induced Defects in Automated Fibre Placement (AFP)

Design of Robotic Fiber Placement Machine and Process Optimization for Thermoplastic Composites

Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites

Effect of process parameters on mode-II interlaminar fracture toughness and fractographic features of automated fibre placement prepreg laminates

Effect of gap and overlap on mode II interlaminar fracture toughness of automated fiber placement prepreg laminates

Laser-assisted AFP-TPC Manufacturing of CF/PEEK High-Performance Thermoplastic Composites with Low Warpage-Deformation Defects

Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates

Exploring Optimal Adaptive Process Parameters for Curved Infill Paths of Additive Manufactured Carbon Fibre Reinforced Polymers

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

Multiscale Collaborative Optimization of Processing Parameters for Carbon Fiber/Epoxy Laminates Fabricated by High-Speed Automated Fiber Placement

Modeling for Heat Transfer of the Thermoplastic Composites <I>In Situ</I> Automated Fiber Placement Process

On the Effects of Process Parameters and Optimization of Interlaminate Bond Strength in 3D Printed ABS/CF-PLA Composite