Abstract:The fiber-reinforced polymer composites are important alternative for conventional structural materials because of their excellent comprehensive performance and weight reduction. The mechanical properties of such composite materials are mainly determined by the fiber orientation induced through practical manufacturing process. In the study, a through process modeling (TPM) method coupling the microstructure evolution and the mechanical properties of fiber-reinforced composites in practical processing is presented. The numerical methodology based on the finite volume method is performed to investigate three-dimensional forming process in the injection molding of fiber-reinforced composites. The evolution of fiber orientation distribution is successfully predicted by using a reduced strain closure model. The corresponding finite volume model for TPM is detailedly derived and the pressure implicit with splitting of operators (PISO) algorithm is employed to improve computational stability. The flow-induced multilayer structure is successfully predicted according to essential flow characteristics and the fiber orientation distribution. The mechanical properties of such anisotropy composites is further calculated based on the stiffness analysis and the Tandon–Weng model. The improvement of mechanical properties in each direction of the injection molded product are evaluated by using the established mathematical model and numerical algorithm. The influences of the geometric structure of injection mold cavity, the fiber volume fractions, and the fiber aspect ratios on the mechanical properties of composite products are further discussed. The mathematical model and numerical method proposed in the study can be successfully adopted to investigate the structural response of composites in practical manufacturing process that will be helpful for optimum processing design.

Modeling for Heat Transfer of the Thermoplastic Composites <I>In Situ</I> Automated Fiber Placement Process

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Thermal Management for Thermoset Automated Fiber Placement Based on Infrared Heater Structure Arrangement

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Efficient 3D temperature field prediction and visualization for AFP process analysis in composite structures

Numerical simulation at the micro-scale for the heat transfer modelling in the thermoplastic composites laser-assisted AFP process

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Temperature Field in the Heat Transfer Process of PEEK Thermoplastic Composite Fiber Placement

The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Atomistic Modeling of the Effect of Temperature on Interfacial Properties of 3D-Printed Continuous Carbon Fiber-Reinforced Polyamide 6 Composite: From Processing to Loading

Research on Void Dynamics during In Situ Consolidation of CF/High-Performance Thermoplastic Composite

A Numerical Simulation Method for the One-Step Compression-Stamping Process of Continuous Fiber Reinforced Thermoplastic Composites

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites