Abstract:The heaters working with supercritical fluids normally suffer from high temperature, high pressure and non-uniform heating, which would lead to thermal fragile and stress failure in practical engineering. However, efficient and accurate methods to predict the comprehensive stress in non-uniformly heating tubes are missing. Besides, to reduce the comprehensive stress, a criterion is required to provide optimization guidance of non-uniformly heating tubes. In present study, the thermal and mechanical performances of three typical non-uniformly heating tubes are numerically investigated using the FVM-FEM method. A generalized thermal deviation factor (GTDF) is then proposed. The results showed that the GTDF can accurately predict the ratio of comprehensive stress to yield strength and GTDF > 1 indicates the plastic deformation, which is much more convenient and efficient than the conventional structural analysis. Based on the GTDF, two methods of reducing heat flux non-uniformity and enhancing tube-inside heat transfer are proposed to reduce the comprehensive stress. The results show that the unilaterally elliptic dimpled tube reduces the maximum comprehensive stress by 30.8% compared with the smooth tube and also prevents the stress concentration in the dimple zone, which can be employed to reduce the comprehensive stress in various tubes under non-uniformly heating conditions.

Stress Analysis of Ellipsoidal Head with Heating Spiral

Comparison of design methods for internally pressurized ellipsoidal head

A Stress Analysis Method for Cylindrical Shells With Nozzles Subjected to Internal Pressure, External Forces and Moments

Case Study Of Nonlinear Buckling With Shape Distortion Due To Thermal Load Ocr

Temperature and stress field analysis of conical trapped joint C/C nozzle divergent section

Thermal Stress Considered in Design of Jacketed Vessel

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Study Of Thermal Stress Distribution On Thick Wall Cylinder By Thermal Shock Treatment

Study on the spinning process of thin-walled aluminum alloy vessel head

Thermoelastic analysis of axisymmetric conical shells: Investigating stress–strain response under uniform heat flow with semi-coupled approach

Analysis of Thermal Performance and Thermal Stress Using Two-Dimensional Thermoelastic Model for a 50 MWe External Cylindrical Solar Receiver

Investigation on Effecting Spiral Heating Plate Bending Forming Parameters

Stress analysis of a thick-walled cylinder composed of incompressible hyperelastic materials subjected to internal and/or external pressure: analytical and finite element analysis

Stress Analysis and Strength Evaluation of High Pressure Reactor

Theoretical Stress Analysis of Intersecting Cylindrical Shells Subjected to External Forces on Nozzle

A Generalized Thermal Deviation Factor to Evaluate the Comprehensive Stress of Tubes under Non-Uniform Heating

Thermal-Mechanical Coupling Analysis of Spiral Tube in Solar Cavity Receiver

The Method of Design by Analysis for Cylindrical Pressure Vessels with Spherically Dished Head

THERMAL STRESS ANALYSIS ON WIRE WINDED SUBDIVIDED-COMBINED LARGE EXTRUSION CONTAINER

An Analytical Method for Cylindrical Shells with Nozzles Due to Internal Pressure and External Loads-Part Ii: Design Method

An Analytical Method for the Thermo-Mechanics Coupling Study of Thin-Walled Spherical Shell Structure