Abstract:Laser powder bed fusion (LPBF) has emerged as an effective method for preparing complex structured silicon carbide (SiC) ceramics. However, the SiC components demonstrate low strength and high brittleness, which remain major challenges limiting its application. To overcome this limitation, short carbon fiber reinforced silicon carbide (C sf /SiC) composites are prepared by combining LPBF and phenolic resin binder impregnation (PRBI)-reactive melt infiltration (RMI), in which high char yield boron -and silicone -containing phenolic resin (BSiPF) impregnation is used to adjust the carbon density of green bodies and to reduce the pore size of green bodies. By optimizing the impregnation process, the carbon density can be brought close to the theoretical optimal value of 0.84 g/cm 3 , and the reduction of the pore size is conducive to the improvement of the reaction rate at the early stage of the reaction, which enhance the SiC phase content of C s f /SiC composites obtained by RMI. Meanwhile, the application of BSiPF results in a protective pyrolytic carbon (PyC) coating on the surface of C sf , which can reduce the erosion of C sf by molten Si during the RMI process, thus improving the fracture toughness of C s f /SiC composites. The final C s f /SiC composites exhibit the enhanced bulk density, bending strength and fracture toughness, reaching 2.90 +/- 0.01 g/cm 3 , 257 +/- 20 MPa, 3.52 +/- 0.15 MPa m 1/2 , respectively. This study provides a new strategy for effective impregnation technique for the additive manufacturing (AM) of high strength and high toughness SiC composites.

Toughening Mechanism Of Short Carbon Fiber Reinforced Reaction Bonded Silicon Carbide Composite Ceramic

Combined Strengthening Mechanism Of Carbon Fiber/Boron Carbide In Reaction Bonded Silicon Carbide Ceramic

Effect of Carbon Particle and Carbon Fiber on the Microstructure and Mechanical Properties of Short Fiber Reinforced Reaction Bonded Silicon Carbide Composite

Morphology and Reinforcing Behavior of Short Carbon Fiber in Reaction Bonded Silicon Carbide

Microstructure and Mechanical Properties of the Reaction-Sintered Silicon Carbide Ceramics Modified by Carbon Fiber

Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Toughening Effect of Short Carbon Fibers in the ZrB2–ZrSi2 Ceramic Composites

Strengthening/Toughening Of Laminated (Sicw+Sicp)/Sic Ceramic Composites

Random Chopped Fibers in Reaction Bonded SiC Composite: Morphology, Etching and Reinforcing Properties

Fabrication and Mechanical Properties of SiC Composites Toughened by Buckypaper and Carbon Fiber Fabrics Alternately Laminated

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Effects of Random Chopped Fiber on the Flexural Strength and Toughness of Reaction Bonded Silicon Carbide Composite

Fabrication and Mechanical Properties of SiC Reinforced Reaction-Bonded Silicon Nitride Based Ceramics

Zirconia Reinforced Reaction Bonded Silicon Carbide Composites: Microstructure and Mechanical Properties

Strengthening and toughening of Ti 5 Si 3 by TiC-coated short carbon fiber: Fabrication, interfacial control, and mechanism of reinforcement

Strengthening and toughening of TiC ceramics by short carbon fibers

Mechanical Properties and Toughening Mechanisms of Si3n4 Matrix Laminated Ceramic Composite

Improved Mechanical Properties of Csf/SiC Composite by Rapid Hot Press Sintering

High Strength and High Toughness Csf/SiC Composites Prepared by Laser Powder Bed Fusion/ Reactive Melt Infiltration with the Impregnation of Boron-and Silicone-Containing Phenolic Resin

Fabrication and Characterization of a Carbon Fibre Reinforced Carbon–silicon Carbide–titanium Silicon Carbide Hybrid Matrix Composite