Abstract:Carbon fiber-reinforced silicon carbide matrix composites (Cf/SiCs) are a new thermos-structural material widely used in aviation and aerospace. The brazed diamond grinding rod is used to machine different surfaces of 3D-Cf/SiCs to investigate the influence of fiber orientations on the grinding process. A unidirectional Cf/SiCs model is built for grinding simulation. The influence of parameters on the grinding force and temperature is investigated. The morphology and roughness S a of a machined surface are observed. In addition, the material removal mechanisms of Cf/SiCs and the wear mechanisms of the grinding rod are studied. The results reveal that the process parameters, including grinding rate v c , feed rate f, and grinding depth, significantly influence the grinding force and temperature. The grinding force and temperature are approximately the same when grinding on surfaces A, B, and C of Cf/SiCs. Moreover, according to the simulation results, the grinding force is maximal when grinding along the fiber end face. Tearing, delamination, and cavities are the main defects. The morphologies and S a of warp, weft, and Z-directional yarns are inconsistent when grinding on surfaces A, B, and C of Cf/SiCs. In addition, the S a is the lowest when grinding along the fiber end face. As the grinding depth increases, compression and shear-induced fracture inside carbon fibers change to bending-induced fracture over the entire fiber. There are two mechanisms for the formation of carbon fiber chips, fracture due to internal crack expansion or fracture due to bending stress after debonding. The surface quality of the carbon fiber fracture is worst when grinding along the fiber end face. The main wear mechanisms of the brazed diamond grinding rod are abrasive wear and PCD grain rupture. As the abrasive grains are worn, the grinding force and grinding temperature increase, and S a decreases and then increases.

Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Effects of chopped carbon fiber on the forming, structure and mechanical properties of CCF/SiC composites fabricated by SLS and RMI

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Effect of Carbon Black on the Microstructure and Mechanical Behaviors of Reaction Bonded Silicon Carbide Ceramics Reinforced by Chopped Fiber

Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method

Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing

Effect of fiber orientation on material removal mechanisms in the machining of 3D Cf/SiC composite with a brazed diamond grinding rod: Experiment and simulation

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Additive manufacturing of continuous carbon fiber-reinforced silicon carbide composite by fused filament fabrication and precursor infiltration pyrolysis

THE MICROSTRUCTURE AND THE PROPERTY OF SiC/Si LAMINATED CERAMIC COMPOSITES FROM PAPER

Fabrication of dense Cf/SiC ceramic matrix composites using 3D printing and PIP with short carbon fibre as a toughening material

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Structure and properties of fine diameter continuous SiC ceramic fiber reinforced Al matrix composites