Abstract:Thermal management has become an important issue to be solved in the miniaturization and weight reduction of electronic equipment, especially in the aerospace field. The doped BaTiO3, as a selfregulating heating material, exhibits an attractive application perspective on the thermal control of electrical devices, resulting from its positive temperature coefficient (PTC) property. However, the Curie temperature of most of the doped BaTiO3 material at present is much higher than the operating temperature of the electrical equipment. On this basis, this paper focuses on the controlling of the Curie temperature and thermal control performance of the BaTiO3-based heating component. The polycrystalline Ba1-xSrxTiO3 was synthesized by solid solution reaction. The Curie temperature is tuned by the content of the strontium element, simultaneously the elements Y and Mn are doped to reduce the room temperature resistivity and improve the PTC effect. The X-ray diffraction demonstrates that the bulk phase of the Ba1-xSrxTiO3 generates in the pre sintering process, while the crystallization of composition has completed during the sintering. Importantly, the Curie temperature of doped Ba1-xSrxTiO3 for x=0.3 with average particle size of 4.86 gm has shifted to around 38 C, beyond that exhibiting a 2.8 -orders magnitude of PTCR jump. Results of the thermal control experiment show that, in contrast to the ordinary resistor heater, the heating element based on the BaTiO3 PTC material can achieve lower equilibrium temperature without any auxiliary control methods. Compared to the traditional thermal control system composed by the ordinary resistor, sensor and controller, the novel thermal control system based on PTC heating unit possesses simple structure, lightweight and excellent reliability.

Effect Of Heat-Treatment Under Nitrogen Atmosphere On The Electrical Properties Of Ptc Thermistor

Influence of sintering atmosphere and nitride additives on microstructure and characteristics of PTCR ceramics

Study On Thermal Control Behavior By Using Batio3-Based Ptc Materials With Room Temperature Curie Point

Effects of Electroless Nickel Plating on Resistivity-temperature Characteristics of (Ba1-Xpbx)tio3thermistor

Effect of Heat Treatment Atmosphere on the Piezoresistivity of Indium Tin Oxide Ceramic Strain Sensor

Effect of sintering and heat treatment on the properties and microstructure of (Sr, Pb) TiO-base thermistor materials

Effects of heat treatment on tensile properties and shape memory effects of ni-ti-nb alloy?

Properties of Commercial Pure Titanium under Self-Heating and High-Pressure Heating Treatment

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Influence of grain boundaries on the properties of Sr0.4Pb0.6TiO3 thermistors

New high temperature NTC thermistors based on BaSm2Ti4O12 ceramics

Preparation Of Porous Batio3 Ptc Thermistors By Adding Graphite Porosifiers

Effects Of Ni And Cu Content On The Electrical Properties Of Mn-Ni-Cu-O Ntc Thermistors

Effect of heat treatment on the electric properties of TaN thin films

Effect of Cr Addition on the Structure and Electrical Properties of CaCu3Ti4O12 NTC Thermistor

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

Influence of permeation of electroless nickel plating solution on porous PTC ceramics

Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Effects of Oxygen Partial Pressure and Thermal Annealing on the Electrical Properties and High-Temperature Stability of Pt Thin-Film Resistors

Study on the Properties of SrxPb1-xTiO3-based Thermistors