Abstract:Present study deals with the effect of size and shape on the compressive strength of concrete. Mixes of five different strengths were designed, all between C20/25 and C50/60 strength class (normal strength concretes). Different size specimens were casted from all mixes in cube (edge length: 50 to 200 mm) and in cylinder (diameter: 60 to 150 mm) shapes as well. An equation was derived to estimate the compressive strength of the differently sized specimen. The parameters of the equation were optimized based on measurement data using nonlinear least-squares method with SSE (sum of squared errors) cost function. The parameter optimization was performed in different models (estimation based on the standard strength of cube or cylinder to approximate the different size specimens' cylinder or cube strength with the edge length, the surface area or the volume as dimension data). The test results showed good agreement between the laboratory measurements and the literature data (compressive strength is decreasing with the increase of the size of the specimen). The derived estimation models showed good correlation with the measurement data and with the literature estimation models, in some cases even with lower errors. The results indicated that size effect is stronger on concretes with lower strength class due to the higher level of inhomogeneity of the material. It was observed that size effect is more significant on cube specimens than on cylinder samples, which can be caused by the side ratios of the specimens and the size of the purely compressed zone. A limit value for the size of both cube and cylinder specimens was determined, above which the size effect on compressive strength can be neglected.

Size Effect On The Cubic Compressive Strength Of Reactive Powder Concrete

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

Size Effect on Strength of Ultra-high Strength Concrete RPC

Shape and size effects on the compressive strength of high-strength concrete

Experimental Study on the Size Effect on the Probability Distribution of Concrete Compressive Strength

Specimen Size and Shape Effect on the Compressive Strength of Normal Strength Concrete

Tests and numerical simulation of size effect on the strength of self-compacting concrete

Investigation on size effects of ultra-high-performance concrete: experimental and numerical study

An Experimental Study Examining the Size Effect on the Compressive Dynamic Performance of Nuclear Power Containment Concrete

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Numerical and theoretical investigation on the size effect of concrete compressive strength considering the maximum aggregate size

Size effect on compressive strength of foamed concrete: Experimental and numerical studies

Experimental Mechanical Properties and Numerical Simulation of C80 Concrete with Different Contents of Stone Powder

Size Effect on Strength of Reinforced Concrete Cylinders Confined by Carbon Fiber-Reinforced Polymer and Transverse Stirrup Reinforcement

Effect of the interaction between rebar and concrete cover on the concrete compressive strength

Experimental Study and Numerical Simulation on the Influence of Specimen Size on Failure Characteristics and Mechanics of Plastic Concrete Under the Uniaxial Compression Test

Experimental Study of Cement's Particle Size Effects on the Compressive Strength of Concrete

Experimental Study on the Size Effect on the Equation of State of Concretes under Shock Loading

Size effect prediction on axial compression strength of circular CFST columns

Experimental Study of Size Effect on Static/Dynamic Flexural-Tensile Strength of Three-Graded Concrete