Abstract:Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3 fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 m. Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect. The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more efficiently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism.

Numerical Simulation of Thermal Effect in Fused Silica Irradiated by Nanosecond High Repetition Rate Laser

Study on thermal stress of the the fused silica irradiated by millisecond–nanosecond combined pulse laser

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

Bulk Damage and Stress Behavior of Fused Silica Irradiated by Nanosecond Laser

Atomic-Level Modeling of A Silicon Nanofilm Irradiated by Ultrashort-Pulsed Laser Bursts

Numerical Simulation on Temperature and Stress of Pulsed Laser Repairing Fused Silica Defects

Theoretical and Experimental Investigations of Localized CO2 Laser-Fused Silica Interactions and Thermo-Mechanical Properties of Mitigated Sites

Behavior Analysis and Threshold Prediction of Laser-Induced Damage in Fused Silica Based on 2-D Thermal Diffusion Model

Calculation of Thermal and Mechanical Effect Induced by Laser in Optical Window Materials

Numerical Simulations of Germanium Nanofilm under Femtosecond Pulse Laser Heating

Simulation Study On The Influence Of Subsurface Deficiency On Fused Silica Laser Damage Threshold

Simulation on Stress Control of Laser Irradiated Fused Silica on ANSYS

Heat Accumulation in Ultrafast Laser Scanning of Fused Silica

Ultrafast heat transfer dynamics induced by femtosecond laser pulse in fused silica

Effects of CO2 Laser Irradiation on Surface Morphology and Stress Distribution of Fused Silica

Mechanisms In Fs-Laser Ablation In Fused Silica

Numerical simulation and validation of subsurface modification and crack formation induced by nanosecond-pulsed laser processing in monocrystalline silicon

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

High Temperature Thermal Behaviour Modeling of Large-Scale Fused Silica Optics for Laser Facility

Heat accumulation effect during CO2 laser processing of fused silica optics

The Photo-Thermal Absorbing Influence on Introducing Laser-Damaging of the Fused Silica