Abstract:In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

Two Different Micromodels of Zinc Oxide Varistors

Effect of Variations in Grain Size and Grain Boundary Barrier Heights on the Current‐ Voltage Characteristics of ZnO Varistors

INFLUENCES OF THE MICROSTRUCTURE ON CURRENT DISTRIBUTION IN ZnO VARISTORS

Microstructural analysis of varistors prepared from nanosize ZnO

Nonuniformity of Electrical Characteristics in Microstructures of Zno Surge Varistors

Discussions on Nonuniformity of Energy Absorption Capabilities of ZnO Varistors

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

Effect Of Nonuniformities Of Microstructure And Electrical Property Of Grain Boundary To The Global Electrical Characteristics

The Correlation Mechanism that Micro-Structure Parameters of ZnO Varistor to the Macroscopic Electrical Characteristics

Time-Domain Response Simulation of ZnO Varistors by Voronoi Network with an Actual Grain Boundary Model

Breakdown Phenomenon of ZnO Varistors Caused by Non-Uniform Distribution of Internal Pores

Influence of Grain Size on Distribution of Temperature and Thermal Stress in ZnO Varistor Ceramics

Microstructure Simulation on Puncturing Phenomenon of ZnO Varistor under High Current

Statistical evaluation of grain boundaries of varistors with modified bismuth oxide

Influences of Twin Boundaries on Microstructural Characteristics of ZnO Varistors Simulated by Voronoi Network

Microstructure Characteristics of ZnO Varistors Simulated by Voronoi Network

Characterisation of Zno-Based Varistors Prepared from Nanometre Precursor Powders

Fabrication of High Performance Multilayer Zno Varistors with Chemically Synthesized Doped Zinc Oxide Powder

High voltage gradient zinc oxide varistors for line surge arresters and GIS tank-type arresters

Simulation on surge responses of ZnO varistors by Voronoi network with actual grain boundary model

A New Model for Simulating Ac and Surge Properties of Zno Varistors Based on Microstructural Characteristics