Abstract:Surface modification of carbon fiber with 1,1-dihydroperoxycyclohexane (DHPC) before application of SiO 2 barrier coating was studied. IR spectroscopy showed presence of the COOH carboxyl groups on the surface of modified carbon fibers. The modified surface has less hydrophobicity due to the presence of polar groups, which contribute to a change in the wettability of the fiber by the sol–gel solution and the adhesion of the oxide coating to the fiber surface. The quality and thickness of the oxide coatings were assessed by scanning electron microscopy. The use of DHPC leads to oxidation of the carbon fiber, making surface longitudinal stripes deeper. To determine the effect of DHPC modification on the properties of the fiber surface, a SiO 2 coating was applied by immersion in a tetraethoxysilane sol. DHPC modification leads to the formation of a uniform SiO 2 coating on the fiber surface. After the heat treatment, the coating thickness on the DHPC–modified fibers is 130 ± 30 nm. Analysis of the IR spectra showed that the addition of DHPC to the sol leads to an increase in the intensity of the Si–O–Si, Si–OH, and OH absorption bands, which are characteristic of the hydrolysis and polycondensation products of tetraethoxysilane. In the wavenumber range of 400–1200 cm –1 , the Si–O–Si fragments form, which is confirmed by the presence of bands of Si–O– deformation bond at ν = 881 and 442 cm –1 . The introduction of DHPC into the sol promotes the formation of a uniform coating on the carbon fibers. The coating thickness on the initial fibers reaches 410±100 nm at room temperature, decreasing to 190±60 nm after heating. The fiber and sol modification contribute to formation of a uniform coating with a thickness of 200 ± 70 nm and 130 ± 30 nm before and after the heating, respectively. DHPC modification of the fiber surface and tetraethoxysilane sol promotes the formation of continuous, uniform, and quality SiO 2 coatings on the surface of carbon fibers.

Influence Of Sic Coating On The Oxidation Behavior Of Pan Carbon Fiber At Elevated Temperatures

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology

Long-time oxidation behavior of the nearly stoichiometric polycrystalline SiC fibers under air atmosphere at different temperatures

High Temperature Oxidation Behavior of SiC Coating Materials

Synthesis and characterization of high-temperature resistant yttrium-doped lanthanum monazite coatings on SiC fibers

Oxidation of Short Carbon Fiber Reinforced Zrb2-Sic Ceramics under Atmospheric and Oxyacetylene Torch Conditions

Effect and mechanism analysis of free carbon on the oxidation behaviour of SiC fibres

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

A Thick SiC-Si Coating Prepared by One-Step Pack Cementation for Long-Term Protection of Carbon/carbon Composites Against Oxidation at 1773 K

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Enhanced antioxidation and microwave absorbing properties of SiC/SiO2 coating on carbon fiber

Oxidation Kinetics and Its Impact on the Strength of Carbon Short Fiber Reinforced C/SiC Ceramics

Oxidation of SiC fibers in water vapor

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Effect of Surface Modification of Carbon Fibers on the Formation of SiO2 Coatings

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Oxidation Resistance and Heat Transfer Simulation of MoSi2-based Coatings on Carbon Fiber Reinforced C-Al2O3 Aerogel Composite

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Effect of oxidation on internal friction behavior of C/SiC composites

Deposition voltages on the phase evolutions, microstructures, and oxidation behaviors of thermal-resistance Glass-MoSi2-SiC coating