Oxidation and mechanical properties of SiC fibers after high temperature exposure in air and steam
Zhongmin Li,Xun Zhang,Qiance Zhang,Egemen Avcu,Philip J. Withers,Ping Xiao
DOI: https://doi.org/10.1016/j.jeurceramsoc.2024.04.076
IF: 5.7
2024-05-07
Journal of the European Ceramic Society
Abstract:SiC fibers are widely used in composites exposed to high temperature oxidizing environments. The present study compares the oxidation behavior of SiC fibers and the associated changes in tensile strength upon their exposure to dry air and steam for up to 50 hours at temperatures from 950°C to 1350°C. In both cases, the scale thickness and oxide microstructure were analyzed by scanning electron microscopy. When the SiC fibers were oxidized in air, a crack-free amorphous oxide layer formed at temperatures up to 1200°C, whereas a cracked, crystallized oxide layer was found at 1350°C. By contrast under steam environment, a crystalline oxide forms at 950°C for oxidation times longer than 30 h. In both environments, the fiber strength decreased with increasing exposure time and temperature, the degradation being faster after oxidation in steam compared to dry air. This appears to relate to residual stress in the oxide scale and a reduction in the cross section of the load-bearing unoxidized SiC. An increase in defect size may also contribute to the loss of strength. The oxide scale follows parabolic growth kinetics in both dry air and in steam from 950°C to 1350°C, except at 1350°C for over 30 hours. The oxidation rate in steam is faster than that in dry air, with activation energies of 79.8±1.4 kJ/mol in steam and 153.6±3.4 kJ/mol in air, respectively. This work is relevant to the application of SiC fibers and SiC fiber reinforced composites in air and steam environments at high temperature.
materials science, ceramics