Design and Experiment of Dynamic Measurement Method for Bulk Material of Large Volume Belt Conveyor Based on Laser Triangulation Method
Fusong Min,Andong Lou,Qun Wei
DOI: https://doi.org/10.1088/1757-899X/735/1/012029
2020-01-18
IOP Conference Series: Materials Science and Engineering
Abstract:In order to improve the measurement accuracy and efficiency of bulk material transported by large-capacity belt conveyor, an online dynamic non-contact metering system based on laser triangulation is designed on the belt conveyor platform. The system includes: laser Scanners, industrial camera, signal processing software, mechanical assemblies. High-precision basic measurement data is an important guarantee for the accuracy of bulk flow measurement. The laser scanner is used as a line source, and the scanning frequency is set to 300HZ, which is installed on the belt conveyor. Industrial camera accepts images produced by a line source projected onto the bulk surface. The signal processing software system analyzes the images, and uses the triangulation method directly calculate the three-dimensional contour information and volume flow of the bulk material. The flow filtering algorithm filters the instantaneous flow, smoothing the fluctuation of the flow data to reflect the real changes of the dry and wet degree of the bulk material on the belt, the degrees of surface cracking and shapes. Establish a mathematical model based on neural network and apply the belt shaking elimination algorithm to correct the previously calculated flow data to reduce the measurement error. In order to restore the actual belt conveyor bulk transportation conditions, a test belt with length 20m and speed 2m/s was produced according to the actual size. The physical simulation test of bulk material for potassium salt was carried out, the results show that the on-line measurement method based on laser triangular method has high efficiency and stable operation, and eliminates the influence of bulk density. The measurement error is ≤3.