Abstract:BackgroundIn the existing studies, the hysteretic model of tensioner is applied in analysis of a belt drive system which can improve the computational accuracy. But the computational efficiency is low and not suitable for system optimization.PurposeIn this paper, an approach is presented to simplify the tensioner’s hysteretic model into an equivalent stiffness and damping which is used for improving the computational efficiency of vibration responses of the belt drive system.MethodA simplified model and computation method of a belt drive system is established. The hysteretic model of a belt tensioner consists of a linear stiffness and viscous damping based on the averaging energy method to simplify the hysteretic parameters and improve the computational efficiency. The equivalent linear stiffness and damping of the tensioner are estimated using an iterative technique. A timing belt drive system is considered as a case study. The belt system's vibration responses are obtained and compared with the measured results to evaluate the performance of the presented approach.Results and conclusionThe computational results are compared with a previously published method, and the difference between the proposed method (Method I) and the previously published method (Method II) is discussed. The presented method has the following merits: (1) The linearization of tensioner’s hysteretic model can improve the computational efficiency greatly with an acceptable computational accuracy. (2) The semi-analytic method which is used to derive the system equations can further reduce the amount of computation. It is suitable for parameter optimization of system.

Effect of Tension on Belt Drive Rotary Motion Error

Effect of Shaft Misalignment on Time-varying Mesh Model of Spur Gear

Method for estimating vibration responses of belt drive systems with a nonlinear tensioner

Dynamic Modeling of the Belt Drive System with an Equivalent Tensioner Model

Measurement and Computational Methods for Rotational Vibration Analysis in Engine Front End Accessory Drive System

Sensitivity Analysis and Parameter Optimization for Vibration Reduction of Undamped Multi-Ribbed Belt Drive Systems

Drive System Design and Error Analysis of the 6 Degrees of Freedom Segment Erector of Shield Tunneling Machine

Optimization Design Method of Tendon-Sheath Transmission Path Under Curvature Constraint

Non-Linear Analysis Of Elastic Quality For Belt Drives

Optimization on Engine Front End Accessory Belt Drive Based on Rotational Vibration Control

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Frequency Sensitivity Analysis of Multi-ribbed Belt Drive Systems

Frequency Sensitivity Analysis on Belt Drive System for Front End Accessories of Engine

The Influence of Coupling Misalignment on Dynamic Characteristics of Helical Gear System

Static stiffness modeling and sensitivity analysis for geared system used for rotary feeding

Influence of the tilt error motion of the rotation axis on the test of the equivalence principle with a rotating torsion pendulum

Steady Motion of a Slack Belt Drive: Dynamics of a Beam in Frictional Contact With Rotating Pulleys

Modeling and Verification of Cable-Hole Transmission Tension Ratio Considering the Cable Lateral Extrusion

The Tooth Profile of Car Synchronous Belt Influencing on the Stress Distribution

Effect of Changing Belt Tension on Machining Surface of CNC Lathe Spindle

Analysis of Main Error Sources for the Error Motion Measurement of a Precision Shafting Using a T-Type Capacitive Sensor