Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Study On Convective Heat Transfer In Fiber-Finned Ducts Based On The Concept Of Equivalent Thermal Conductivty

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Study of Heat Conduction Transfer Functions of Fins

A Simplified Model For Analysis On Flow And Heat Transfer In Fiber-Finned Channels

Convective Heat Transfer Enhancement in a Circular Tube with Microfiber Fin

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study Of Enhanced Heat Transfer In Ducts With Periodic Rectangular Fins Along The Main Flow Direction

A Study of the Intensified Heat Transfer in Longitudinally Ridged Internal-finned Tubes

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

Turbulent Heat Transfer Performance of Internally Longitudinally Finned Tubes

Numerical Study on the Heat Transfer and Pressure Drop Characteristics of Fin-and-tube Surface with Four Round-Convex Strips Around Each Tube

Experimental Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Transitional Flow and Heat Transfer Characteristics in a Rectangular Duct with Stagger-arrayed Short Pin Fins

Enhancement mechanism on heat and mass transfer of tall fin with cycloid thermosyphon loop

HEAT TRANSFER ENHANCEMENT IN INSERTED EXTRUDED ALUMINUM FINNED TUBES

Enhancement Mechanisms for Single-Phase Turbulent Heat Transfer in Micro-Fin Tubes

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

Systematic Comparison on Convective Heat Transfer Characteristics of Several Pin Fins for Turbine Cooling