Abstract:Well established understanding of flow boiling heat transfer and its hydrodynamic driving mechanisms have led to the inception of surface geometry augmentation techniques that can enhance thermal-hydraulic performance. Enhancing the flow boiling heat transfer at a reasonable pressure drop enables the deployment of more compact and efficient heat exchangers and thermal systems. To enable ease of manufacturing, simplicity, and reliability, passive augmentation techniques that do not require external stimuli are preferred. In this study, a scalable copper microstructuring technique was developed on both smooth and internally finned 0.25" tubes to investigate how it affects the thermofluidic behavior of relatively higher surface tension water during saturated flow boiling. The internally finned tubes used in this study comprised of 50 fins with a helical angle of 13°. To apply the conformal microstructures on the internal tube surfaces, chemical oxidation via an alkaline mixture was used, resulting in structures having characteristic length scales approaching 200 nm −1 μm. Our results show that microstructuring of plain copper tubes provides a water flow boiling heat transfer coefficient enhancement ranging from 10 % to 90 % compared to untreated specimens for vapor qualities ranging from 0 to 0.1 and mass flow rates ranging from 255 to 485 kg/(m 2 ·s). Augmentation is attributed to the increased roughness of the plain copper tubes that creates additional nucleation sites for enhanced liquid entrapment and increases wettability. Associated with this heat transfer augmentation is an increased pressure drop ranging from 0.5 % to 38 % relative to untreated tubes due to the increased skin friction as well as add fluid flow disruption. Overall, the performance factor ranged between 0.86 to 1.81 demonstrating that the augmentation in heat transfer overshadowed the increase in pressure drop. Interestingly, applying the conformal microstructures on internally finned copper tubes decreased the heat transfer coefficient and pressure drop by as much as 75 % and 45 %, respectively, when compared to the un-structured finned copper tubes counterparts. The decrease in heat transfer performance and pressure drop was attributed to partial wetting of the fin roots due to the presence of a vapor layer near the inner tube walls. Our work develops a mechanistic understanding of the role that microstructures play during flow boiling of water on industrially applicable smooth and finned tube geometries and designs.

Enhancement Mechanisms for Single-Phase Turbulent Heat Transfer in Micro-Fin Tubes

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study of Single-Phase Pressure Drop and Heat Transfer in a Micro-Fin Tube

Numerical Simulation of Heat Transfer and Pressure Drop Characteristics of Internal Microfin Tubes

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Convective Heat Transfer Enhancement in a Circular Tube with Microfiber Fin

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Heat Transfer Enhancement of Microchannel Heat Sink Using Sine Curve Fins

Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow

Numerical Investigation of Thermo-Flow Characteristics of Tubes with Transverse Micro-Fins

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

Heat Transfer Performance of Microfin Tubes and -Three-dimensional Heat Transfer Tubes

Roughness Enhanced Mechanism for Turbulent Convective Heat Transfer

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes

Saturated water flow boiling heat transfer and pressure drop in scalably microstructured plain and finned copper tubes

Numerical Analysis of the Enhanced Convection Heat Transfer in an Annular Finned Tube with Laminar Pulsating Flow

Experimental Study on Heat Transfer Performance and Flow Pattern in Micro-Fin Tubes and 1EHT Three-Dimensional Heat Exchange Tubes

Investigating Enhanced Convection Heat Transfer in 3D Micro-Ribbed Tubes Using Inverse Problem Techniques

Heat transfer enhancement using combined microchannel with vertical rectangular micro fins

Heat Transfer Augmentation and Entropy Generation Analysis of a Helically Coiled Tube with Internal Longitudinal Fins