Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys
Shuhei Yoshida,Rui Fu,Wu Gong,Takuto Ikeuchi,Yu Bai,Zongqiang Feng,Guilin Wu,Akinobu Shibata,Niels Hansen,Xiaoxu Huang,Nobuhiro Tsuji
DOI: https://doi.org/10.1016/j.actamat.2024.120498
IF: 9.4
2024-11-05
Acta Materialia
Abstract:Face-centered cubic (FCC) high/medium entropy alloys (HEAs/MEAs), novel multi-principal element alloys, are known to exhibit exceptional mechanical properties at room temperature; however, the origin is still elusive. Here, we report the deformation microstructure evolutions in a tensile-deformed Co 20 Cr 40 Ni 40 representative MEA and Co 60 Ni 40 alloy, a conventional binary alloy for comparison. These FCC alloys have high/low friction stresses, fundamental resistance to dislocation glide in solid solutions, respectively, and share similar other material properties, including stacking fault energy. The Co 20 Cr 40 Ni 40 MEA exhibited higher yield strength and work-hardening ability than in the Co 60 Ni 40 alloy. Deformation microstructures in the Co 60 Ni 40 alloy were marked by the presence of coarse dislocation cells (DCs) regardless of grain orientation and a few deformation twins (DTs) in grains with the tensile axis (TA) near 〈1 1 1〉. In contrast, the MEA developed three distinct deformation microstructures depending on grain orientations: fine DCs in grains with the TA near 〈1 0 0〉, planar dislocation structure (PDS) in grains with other orientations, and a high density of DTs along with PDS in grains oriented 〈1 1 1〉. Three-dimensional electron tomography revealed that PDS in the MEA confined dislocations within specific {1 1 1} planes, indicating suppression of cross-slip of screw dislocations and dynamic recovery. In-situ X-ray diffraction during tensile deformation showed a higher dislocation density in the MEA than in the Co 60 Ni 40 alloy. These findings demonstrate that FCC HEAs/MEAs with high friction stresses naturally develop unique deformation microstructures which is beneficial for realizing superior mechanical properties compared to conventional materials.
materials science, multidisciplinary,metallurgy & metallurgical engineering