Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

Heterogeneous lattice strain strengthening in severely distorted crystalline solids

Compositional Undulation Induced Strain Hardening and Delocalization in Multi-Principal Element Alloys

Hierarchical multiscale crystal plasticity framework for plasticity and strain hardening of multi-principal element alloys

Dislocation flow turbulence simultaneously enhances strength and ductility

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Effect of Lattice Distortion on the Core Structure of Edge Dislocation in a Tawnbmo Multi-Principal Element Alloy

Probing the Lattice-Distortion Effect on Yield Strengths in High Entropy Alloys

Correlating dislocation mobility with local lattice distortion in refractory multi-principal element alloys

Maximum strength and dislocation patterning in multi–principal element alloys

Chemical inhomogeneities in high-entropy alloys help mitigate the strength-ductility trade-off

Evaluating the Solid Solution, Local Chemical Ordering, and Precipitation Strengthening Contributions in Multi-Principal-element Alloys

A Hierarchical Multiscale Crystal Plasticity Model for Refractory Multi-Principal Element Alloys

Lattice-distortion Dependent Yield Strength in High Entropy Alloys

Effects of lattice distortion and chemical short-range ordering on the incipient behavior of Ti-based multi-principal element alloys: MD simulations and DFT calculations

Data-Driven Insights into the Structural Essence of Plasticity in High-Entropy Alloys

Elucidating the mesoscale deformation in a multi-principle element alloy with hexagonal closed-packed crystal structure

Exploring the relationship between lattice distortion and phase stability in a multi-principal element alloy system based on machine learning method

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

Transitions in the morphology and critical stresses of gliding dislocations in multiprincipal element alloys

Deformation Microstructures and Strength of Face-Centered Cubic High/medium Entropy Alloys

Lattice distortion enabling enhanced strength and plasticity in high entropy intermetallic alloy