Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

Chemical short-range-order induced multiscale strengthening in refractory medium entropy alloys

Compositional Undulation Induced Strain Hardening and Delocalization in Multi-Principal Element Alloys

Chemical short-range ordering regulated dislocation cross slip in high-entropy alloys

Chemical medium-range order in a medium-entropy alloy

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Ultrastrong and ductile medium-entropy alloys via hierarchical ordering

The effect of short-range order on mechanical properties of high entropy alloy Al0.3CoCrFeNi

Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering

Verification of Short-Range Order and Its Impact on the Properties of the CrCoNi Medium Entropy Alloy

Phase stability, local chemical disorder and its effect on the mechanical properties of refractory high-entropy alloys

Effect of short-range order on lattice distortion, stacking fault energy, and mechanical performance of Co-Fe-Ni-Ti high-entropy alloy at finite temperature

Research on optimizing strength and ductility of HfNbTaZr dual-phase high-entropy alloy by tuning chemical short-range order

Investigations on the role of chemical short-range order in the tensile deformation of FCC Co30Fe16.67Ni36.67Ti16.67 high-entropy alloys via Monte Carlo and molecular dynamics hybrid simulations

Chemical short-range order strengthening mechanism in CoCrNi medium-entropy alloy under nanoindentation

Nanoscale Indentation-Induced Crystal Plasticity in CrCoNi Medium-Entropy Alloys Containing Short-Range Order

Chemical short range order and deformation mechanism of a refractory high entropy alloy HfNbTaZr under nanoindentation: An atomistic study

Chemical Short Range Order Strengthening in a Model FCC High Entropy Alloy

Simultaneously enhancing strength–ductility synergy in refractory high entropy alloys by a heterogeneous structure design

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

Retainable short-range order effects on the strength and toughness of NbMoTaW refractory high-entropy alloys

Multiscale Modeling of Dislocation-Mediated Plasticity of Refractory High Entropy Alloys