Abstract:The study of alloys exhibiting noteworthy strength-ductility synergy at ambient and cryogenic temperatures has been a persistent area of interest in materials engineering. This interest extends to the recent development of high-entropy alloys (HEAs). The current investigation delves into the impact of diverse thermo-mechanical treatments on the phase and microstructure evolution in a face-centered cubic (FCC) Al7.5Co20.5Fe24Ni24Cr24 HEA. The transition from solid-solution annealing to recrystallization annealing leads to the formation of the desired hierarchical B2+L12+ σ precipitates, accompanied by a heterogeneous FCC matrix. The initiation of the B2 phase originates from nucleation on defect-rich sites, such as deformation bands. However, the coherent L12 phase homogeneously forms in the FCC matrix at intermediate temperature aging, as these sites are scarce or occupied. A heterogeneous structure emerges from the transition in annealing temperatures and the pinning effect of the B2 precipitates. The resulting heterogeneous structure exhibits an exceptional strength-ductility synergy at both room and liquid nitrogen (LN2) temperatures. This is evident in its mechanical properties with a yield strength of ∼717 MPa / ∼1109 MPa, an ultimate tensile strength of ∼1086 MPa / ∼1609 MPa, and an elongation of ∼34.3 % / ∼43.2 % at room / LN2 temperatures. The formation of deformation twins (DTs) is facilitated by localized stress buildup from hetero-deformation-induced (HDI) hardening stress at room temperature. The exceptional strength and ductility at LN2 temperature are attributed to a combination of factors. These include a high-density of stacking faults (SFs), DTs, and their interactions, including those with precipitates, SFs-based substructures, and Lomer-Cottrell locks. These multiple deformation mechanisms ensure consistent and sustained strain-hardening even under substantial strain. This paper sheds light on the complex interplay of microstructure, deformation mechanisms, and mechanical properties in the Al7.5Co20.5Fe24Ni24Cr24 HEA, potentially guiding the development of ultra-strong yet ductile alloys for cryogenic applications.

Ultrastrong and ductile medium-entropy alloys via hierarchical ordering

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Achieving exceptional strength-ductility combination in a novel L1 2 nanoparticles-strengthened high-entropy alloy via conventional casting

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling

Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Theory-guided design of high-entropy alloys with enhanced strength-ductility synergy

Ultrahigh cryogenic strength and ductility in a duplex metastable ferrous medium-entropy alloy

Achieving exceptional strength-ductility synergy in a dual-phase high entropy alloy via architected complex microstructures

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Local chemical order enables an ultrastrong and ductile high-entropy alloy in a cryogenic environment

Enhanced strength and ductility synergy of a CoCrFeMnNi high entropy alloy with a hierarchical structure via severe distortion

A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range

Chemical short-range-order induced multiscale strengthening in refractory medium entropy alloys

Strengthening of ferrous medium entropy alloys by promoting phase transformation

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure