Abstract:UNLABELLED:A general model has been developed for analyzing the removal of volatile organic compounds (VOCs) by photocatalytic oxidation (PCO) reactors, taking into consideration of the photocatalytic (surface) reaction and the convective mass transfer coefficients including allowance for their spatial dependence. On this basis, a novel insight into VOC removal performance of PCO reactors is presented. The key parameter for evaluating PCO reactor VOC removal performance is the number of the mass transfer unit (NTU(m)), which is shown to be a simple linear product of three dimensionless parameters: the ratio of the reaction area to the cross-sectional area of the flow channel (A*), the Stanton number of mass transfer (St(m)), and the reaction effectiveness (eta). The A* represents the geometric and structural characteristic of a PCO reactor. The St(m) shows the synergistic degree of alignment between the fluid and mass flow fields, and reflects the convective mass transfer rate of the reactor. The eta, describes the relative intensity between the PCO reaction rate and the mass transfer rate. By using the relationship and the parameters, the influence of various factors on the VOC removal performance, the bottleneck for improving the performance and design of a PCO reactor can be determined. Three examples are used to illustrate the application of our proposed model. It is found that the VOC removal bottleneck is the reaction rate for honeycomb type reactor, while mass transfer rate for light-in-tube type reactor. With six fins the fractional conversion of a light-in-tube reactor increases about 70% relative to the one without any fins.PRACTICAL IMPLICATIONS:Indoor air quality problem caused by volatile organic compounds (VOCs) have annoyed people for many years. Photocatalytic oxidation (PCO) appears to be a promising technique for destroying VOCs in indoor air. With the model and the novel insight presented in this paper, the influence of various factors on the VOC removal performance can be determined. And the bottleneck for improving the performance of a PCO reactor can be easily identified. These are helpful for designing high performance PCO reactors and optimizing their operative performance.

Influence Of Fins On Formaldehyde Removal Performance Of Annular Photocatalytic Reactors

Influence of fins on formaldehyde removal in annular photocatalytic reactors

Enhancement of formaldehyde removal performance in light-in-tube photocatalytic reactors

Novel Insight into VOC Removal Performance of Photocatalytic Oxidation Reactors.

Effects of Structural Parameters on the Performance of a Micro-Reactor with Micro-Pin-fin Arrays (MPFAR) for Hydrogen Production

Modeling of Formaldehyde Photocatalytic Degradation in a Honeycomb Monolith Reactor Using Computational Fluid Dynamics

Process optimization of plasma-catalytic formaldehyde removal using MnOx–Fe2O3 catalysts by response surface methodology

Three-dimensional Numerical Study on Finned Reactor Configurations for Ammonia Thermochemical Sorption Energy Storage

Research of formaldehyde removal by room temperature thermo-catalytic oxidation reactor

Performance study on plain fin filled with catalyst in a plate fin heat exchanger for hydrogen liquefaction

Optimization Strategy for Formaldehyde Removal by Carbon Cathode Electro-Fenton: Enhancement of Formaldehyde and Oxygen Co-adsorption by Rational Nitrogen Doping Types

Heat management in sonochemical reactor using fins-PCM integrated system: Unveiling the influence of the sonicated volume

Mechanisms of efficient indoor formaldehyde removal via electro-Fenton: Synergy in ·OH generation and utilization through a modified carbon cathode

Experimental Research on the Separation of Formaldehyde Wastewater by Pervaporation

Improvement of water resistance by Fe2O3/TiO2 photoelectrocatalysts for formaldehyde removal: experimental and theoretical investigation

Design optimization of a novel annular fin on a latent heat storage device for building heating

The Influence of the Inclined Angle and Circulating Flow Rate on the Performance of Flat-plate Type Photocatalytic Reactor

Removal of formaldehyde in urban office building by the integration of ventilation and photocatalyst-coated window

Optimization of the electro-photocatalytic process for the removal of formaldehyde from water using the Taguchi model

Structural improvement of catalyst filled channel of continuous ortho-para hydrogen conversion technology

Numerical investigation on effects of using segmented and helical tube fins on thermal performance and efficiency of a shell and tube heat exchanger