Abstract:Ultraviolet photocatalytic oxidation (UVPCO) systems for removal of volatile organic compounds (VOCs) from air are being considered for use in office buildings. Here, we report an experimental evaluation of a UVPCO device with tungsten oxide modified titanium dioxide (TiO2) as the photocatalyst. The device was challenged with complex VOC mixtures. One mixture contained 27 VOCs characteristic of office buildings and another comprised 10 VOCs emitted by cleaning products, in both cases at realistic concentrations (low ppb range). VOC conversion efficiencies varied widely, usually exceeded 20%, and were as high as approximately 80% at about 0.03 s residence time. Conversion efficiency generally diminished with increased airflow rate, and followed the order: alcohols and glycol ethers > aldehydes, ketones, and terpene hydrocarbons > aromatic and alkane hydrocarbons > halogenated aliphatic hydrocarbons. Conversion efficiencies correlated with the Henry's law constant more closely than with other physicochemical parameters. An empirical model based on the Henry's law constant and the gas-phase reaction rate with hydroxyl radical provided reasonable estimates of pseudo-first order photocatalytic reaction rates. Formaldehyde, acetaldehyde, acetone, formic acid and acetic acid were produced by the device due to incomplete mineralization of common VOCs. Formaldehyde outlet/inlet concentration ratios were in the range 1.9-7.2. Practical implications: Implementation of air cleaning technologies for both VOCs and particles in office buildings may improve indoor air quality, or enable indoor air quality levels to be maintained with reduced outdoor air supply and concomitant energy savings. One promising air cleaning technology is ultraviolet photocatalytic oxidation (UVPCO) air cleaning. For the prototype device evaluated here with realistic mixtures of VOCs, conversion efficiencies typically exceeded the minimum required to counteract predicted VOC concentration increases from a 50% reduction in ventilation. However, the device resulted in the net generation of formaldehyde and acetaldehyde from the partial oxidation of ubiquitous VOCs. Further development of the technology is needed to eliminate these hazardous air pollutants before such a UVPCO device can be deployed in buildings.

Removal of formaldehyde in urban office building by the integration of ventilation and photocatalyst-coated window

Catalytic Ozonation of Formaldehyde with an Oxygen-Vacancy-Rich MnOx/γ-Al2O3 Catalyst at Room Temperature

A self-cleaning window for high-efficiency photodegradation of indoor formaldehyde

Experiments and Kinetics of Solar PCO for Indoor Air Purification in PCO/TW System

Performance of ultraviolet photocatalytic oxidation for indoor air cleaning applications

Highly Active Amino-Fullerene Derivative-Modified TiO2 for Enhancing Formaldehyde Degradation Efficiency under Solar-Light Irradiation

Removal of Indoor Volatile Organic Compounds via Photocatalytic Oxidation: A Short Review and Prospect

Long-lasting removal of indoor formaldehyde in continuous airflow by B–TiO2@AC composites

Kinetic studies on using photocatalytic coatings for removal of indoor volatile organic compounds

Decahedral BiVO4/tubular g-C3N4 S-scheme heterojunction photocatalyst for formaldehyde removal: Charge transfer pathway and deactivation mechanism

Experimental study on pollutant elimination from indoor air in a new-decorated office

Research of formaldehyde removal by room temperature thermo-catalytic oxidation reactor

Thermal, Electrical and Purification Performance of a Novel Thermal-Catalytic CdTe Double-Layer Breathing Window in Winter

Efficient degradation of formaldehyde based on DFT-screened metal-doped C3N6 monolayer photocatalysts: performance evaluation and mechanistic insights

Indoor Formaldehyde in Real Buildings: Emission Source Identification, Overall Emission Rate Estimation, Concentration Increase and Decay Patterns

Thermal catalytic oxidation performance study of SWTCO system for the degradation of indoor formaldehyde: Kinetics and feasibility analysis

Efficient Photothermal Elimination of Formaldehyde under Visible Light at Room Temperature by a MnO x-Modified Multi-Porous Carbon Sphere

Mechanisms of efficient indoor formaldehyde removal via electro-Fenton: Synergy in ·OH generation and utilization through a modified carbon cathode

TiO2@g-C3N4/SiO2 with superior visible-light degradation of formaldehyde for indoor humidity control coatings

Synergistic Effects of Multitype Carbon Doping and Oxygen Vacancies in TiO2/CNTs Composite Fabricated Via Nonthermal Plasma for Formaldehyde Removal.

Removal of Formaldehyde Using Highly Active Pt/TiO2 Catalysts Without Irradiation