Abstract:Latent heat storage is widely investigated by the researchers due to its high volumetric energy density which makes it possible to largely reduce the energy storage cost. However, the phase change materials are known to suffer from poor thermal conductivity which greatly limits its use in the industry. A large amount of work has been carried out to enhance the heat transfer capability of the latent heat storage system. From a structural perspective, embedding of fin structure into the heat storage tank is considered as an effective way to lead to the overall heat transfer enhancement. For the moment, shape optimization and sizing optimization are the two most common optimization methods that are used to find the efficient finned structure in a heat storage tank. However, by predefining the shape of the geometry, the shape optimization and sizing optimization have more constraints when performing the optimization which limits the possibilities of a design change. Different from these two optimization approaches mentioned above, the topology optimization requires only few constraints when performing the optimization which enables dramatic design change without predefining the shape of the geometry. The core problem solved by the topology optimization is about the distribution of the materials and their topological connection within the design field. By topology optimization, high thermal conductive materials can be distributed in the heat storage tank in a way which maximizes the overall heat transfer capability of the heat storage system. The topology optimization of a classic tube-and-shell latent heat storage tank is studied in this paper to enhance the overall heat transfer capability. By combining the topology optimization theory and the classic finite element method, a 2-D heat storage tank model has been built for the optimization of the fin structure. Besides, a comparison between the topology optimized fin structure and other typical types of fin structures is carried out. The numerical simulation is also performed considering the effect of natural convection to see its impact on the design change of final result. Furthermore, the current research on topology optimization focuses mainly on the design phase. Few studies have been done to validate numerically the reliability of the reconstructed topology optimized design which is necessary before an experimental validation. Hence, in this paper, a numerical reconstruction of the fin structures is carried out and the validation of the result is performed. Several results could be drawn from the current research: The topology optimization shows its advantage over common fin structure design; The influence of natural convection on optimization has been investigated and analyzed; The result has been reconstructed in common CAD form and corresponding validation has been performed which serves for the preparation of the upcoming experimental investigation.

Design optimization of a novel annular fin on a latent heat storage device for building heating

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Effect of novel concentric annular fins on the melting and solidification process of stearic acid in thermal energy storage devices

Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit

Evaluation and optimization of melting performance in a horizontal thermal energy storage unit with non-uniform fins

Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube

Melting-solidification cycle of finned heat storage tank: Optimization of fin structure by response surface method

Influence of fin parameters on the melting behavior in a horizontal shell-and-tube latent heat storage unit with longitudinal fins

Discharging performance evaluation and optimization of a latent heat thermal energy storage unit with helm-shaped fin

Fin Structure Optimization for Improving Heat Transfer Efficiency and Hydrogen Absorption Rate of Metal Hydride Hydrogen Storage Tank

Numerical Investigation of Heat Transfer Performance and Structural Optimization of Fan-Shaped Finned Tube Heat Exchanger

Heat transfer enhancement of latent heat thermal energy storage with longitudinal stepped fins inside heat transfer fluid

Structure Optimization of Longitudinal Rectangular Fins to Improve the Melting Performance of Phase Change Materials Through Genetic Algorithm

Experimental and Numerical Investigation of Longitudinal and Annular Finned Latent Heat Thermal Energy Storage Unit

Improving the Solidification Performance of a Latent Heat Thermal Energy Storage Unit Using Arrow-Shaped Fins Obtained by an Innovative Fast Optimization Algorithm

Numerical and Experimental Study on Topology Optimization of Fin Configuration in Latent Heat Storage

Study on heat storage performance of a novel vertical shell and multi-finned tube tank

Solidification Performance of a Latent Heat Storage Unit with Innovative Longitudinal Triangular Fins

The Topology Optimization of the Fin Structure in Latent Heat Storage

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Enhancing Heat Transfer and Energy Storage Performance of Shell-and-Tube Latent Heat Thermal Energy Storage Unit with Unequal-Length Fins