Abstract:<p>Adding longitudinal fins is an efficient method to enhance the melting behavior of a horizontal heat-storage tube. Nevertheless, the inhomogeneous heat transfer intensity, which is brought by the natural convection of liquid phase change material, causes a hard-melting region in the bottom half of the tube. In this study, two-dimensional models considering natural convection have been established to investigate the melting of phase change material in the latent heat storage unit with longitudinal fins. Optimization of the structural parameters, including fin-thickness and fin-length, are conducted and numerically calculated to accelerate the melting process. To enhance the charging of the hard-melting region, four strategies are employed and compared with the conventional model 1, whose fin length and fin thickness are constant. It is observed that the intensity of heat transfer is higher in the top-half domain, and it is lower in the bottom half. Moreover, thickening the bottom fins and thinning the top fins can efficiently enhance the charging process. An 8.7% reduction in the complete melting time can be realized by model 6 with the thickest bottom fins as compared to model 1 with equal length and equal thickness fins. Meanwhile, model 9, who has the longest bottom fins, can reduce the complete melting time by 47.1% as compared to model 1, so that the method of lengthening the bottom fins and shortening the top fins is likewise useful in accelerating the melting process. Based on the two strategies, we proposed an optimal model 10, who has the thickest and longest bottom fins, is conducted, and the complete melting time can be reduced by 54.1% compared with the original model 1. Consequently, the key limitation of heat storage in the horizontal tube is located in the bottom half, which is defined as hard-melting region, and thickening and lengthening the bottom fins is conducive to enhance the heat storage in the horizontal tube.</p>

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Influence of fin parameters on the melting behavior in a horizontal shell-and-tube latent heat storage unit with longitudinal fins

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Evaluation and optimization of melting performance in a horizontal thermal energy storage unit with non-uniform fins

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Assessment on the melting performance of a phase change material based shell and tube thermal energy storage device containing leaf-shaped longitudinal fins

Thermal performance optimization and evaluation of a radial finned shell-and-tube latent heat thermal energy storage unit

Numerical investigation of the impact of toothed fins on the heat transfer performance of a shell-and-tube exchanger during phase change material melting process

Enhancing Heat Transfer and Energy Storage Performance of Shell-and-Tube Latent Heat Thermal Energy Storage Unit with Unequal-Length Fins

Melting assessment on the effect of nonuniform Y-shaped fin upon solid–liquid phase change in a thermal storage tank

Discharging performance evaluation and optimization of a latent heat thermal energy storage unit with helm-shaped fin

Evaluation and Optimization of the Thermal Storage Performance of a Triplex-Tube Thermal Energy Storage System with V-Shaped Fins

Heat Storage Performance of PCM in a Novel Vertical Pointer-Shaped Finned Latent Heat Tank

Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube

Comprehensive analysis of melting enhancement by circular Y-shaped fins in a vertical shell-and-tube heat storage system

Numerical study on the melting performance of PCM by fractal fins in three-tube heat storage system

Study on heat storage performance of a novel vertical shell and multi-finned tube tank

Study on heat storage performance of a novel bifurcated finned shell-tube heat storage tank

Numerical melting performance analysis of a cylindrical thermal energy storage unit using nano-enhanced PCM and multiple horizontal fins

Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit

Study of the melting performance of shell-and-tube latent heat thermal energy storage unit under the action of rotating finned tube