Abstract:As the power density of the power transmission device increases, heat exchangers are required to dissipate more heat and provide better flow resistance in the limited space of the vehicle. In this study, the synergy mechanism of the temperature field, pressure field, and velocity field in the serrated fin channel of the plate-fin heat exchanger (PFHX) was thoroughly analyzed under the guidance of the three-field synergy principle. This study also quantitatively revealed the distribution of the angle θ between the temperature gradient and velocity, and the angle α between the pressure gradient and velocity. For the regions in the channel where θ was too large (i.e., poor synergy between temperature and velocity fields) and α was too small (i.e., poor synergy between pressure and velocity fields), high-efficiency and low-resistance fin structures were proposed. The performance improvement of the new structures was quantified using the comprehensive heat transfer and flow resistance performance evaluation plot in the three-field synergy standard. The results indicate that the new structures improve the synergy of the three fields in the channel. When the air velocity is 15 m s −1 , the average synergy angle θ m between the temperature gradient and the velocity of the two structures, changing the inlet flow direction and the slotted fin, decreases from 83.4° to 80.3° and 82.8°, respectively. The outlet temperature increases by 2.3 and 1.6 K, respectively, compared to the basic structure, indicating enhanced the heat transfer of the PFHX. By changing the shape of the fin cross-section, the average synergy angle α m between the pressure gradient and the velocity increased from 143.6° to 150.8°, while θ m increased by only 0.6°. The pressure loss was reduced by 15.2% compared to the basic structure, resulting in a significant decrease in pressure drop while maintaining essentially the same heat transfer performance. Meanwhile, the optimized PFHX can increase the heat transfer rate by 0.2%–8% under identical pump power. This work provides guidance on selecting high-efficiency and low-resistance vehicle-mounted PFHXs.

Structural improvement of catalyst filled channel of continuous ortho-para hydrogen conversion technology

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Study on continuous cooling process coupled with ortho-para hydrogen conversion in plate-fin heat exchanger filled with catalyst

Study on multi-stream plate fin heat exchanger coupled with ortho-para hydrogen conversion based on distributed parameter model

Roles of Catalysts’ Porous Media Feature and Catalytic Conversion Effect on the Performance of Plate-Fin Heat Exchangers in Hydrogen Liquefaction

Numerical Study on Comprehensive Performance of Flow and Heat Transfer Coupled with Ortho-Para Hydrogen Conversion

Performance study on plain fin filled with catalyst in a plate fin heat exchanger for hydrogen liquefaction

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Multiphysics Studies of 3D Plate Fin Heat Exchanger Filled with Ortho-Para-Hydrogen Conversion Catalyst for Hydrogen Liquefaction

Fin Structure Optimization for Improving Heat Transfer Efficiency and Hydrogen Absorption Rate of Metal Hydride Hydrogen Storage Tank

Temperature-dependent Matching of Heat Transfer and Catalysis in Cryogenic Heat Exchangers with Ortho-Para Hydrogen Continuous Conversion

Exploration and numerical study of new structures for high-efficiency and low-resistance vehicle-mounted plate-fin heat exchanger based on the three-field synergy principle

Augmentation of Plate-Fin Heat Exchanger Performance with Support of Various Types of Fin Configurations

Design and optimization of a new heterogeneous printed circuit plate heat exchanger with molten salt zigzag passage and supercritical CO2 airfoil fin passage

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Dimensionless Performance Mapping of Cryogenic Plate-Fin Heat Exchangers with Ortho-Para Hydrogen Continuous Conversion for Hydrogen Liquefaction

Thermodynamic analysis of vapor-cooled shield with para-to-ortho hydrogen conversion in composite multilayer insulation structure for liquid hydrogen tank

Numerical simulation on flow and heat transfer performances of serrated and wavy fins in plate-fin heat exchanger for hydrogen liquefaction