Abstract:A fiber magnetic field sensor with temperature compensation is put forward and experimentally verified by utilizing Fabry-Perot interferometer (FPI) and multimode interferometer (MI). The FPI with ultra-short cavity (about 20 mu m), which is proposed to improve the spectrum contrast after being filled with oil-based magnetic fluids (MF) and achieve the sensing of magnetic field, is drilled through by femtosecond laser. The FPI is composed of two sections of single mode fiber and a hollow core fiber, which is named as single mode fiber -hollow core fiber-single mode fiber (SHS). The MI composed of the coated-fiber-loop, which is only sensitive to temperature, is proposed to compensate the temperature on the sensing of magnetic field. The fiber loop is fabricated by only bending a section of coated single mode fiber (SMF). According to the experiment results, the spectrum visibility of magnetic field sensing part can be improved by 3.1 times by shortening the Fabry-Perot (FP) cavity length. The interference wavelength increases nonlinearly from 0 to 69.1 Gs while linearly from 69.1 to 137.7 Gs. In addition, its temperature sensitivity is-0.20 nm/degrees C from 23.0 to 42.9 degrees C. Moreover, the sensitivity of MI is-2.31 nm/degrees C from 23.0 to 42.9 degrees C. It could be used to compensate the temperature influence effectively. The structure boasts characteristics of simple manufacture, low cost and highly-sensitive, which can be applied in the fields of magnetic field sensing.

Fiber Laser Temperature Sensor Based on SMF-TMCF-SMF Structure in 2 m Band

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A Fiber Ring Cavity Laser Temperature Sensor Based on Polymer-Coated No-Core Fiber as Tunable Filter

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Temperature Sensing Characteristics Based on Up-Taper and Single Mode–Multimode Fiber Structure

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Temperature Characterization of Thin-Walled-microsphere Air-Cavity Fiber Sensing Structures

Femtosecond laser-inscribed fiber-optic sensor for simultaneous temperature and relative humidity measurements

High-Sensitivity Temperature Fiber Sensor Based on Two Cascaded Balloon-shaped Bent SMFs integrated with a Seven-core fiber

Temperature Sensor Based on Er-Doped Cascaded-Peanut Taper Structure In-Line Interferometer in Fiber Ring Laser

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

Simultaneous Measurement of Magnetic Field and Temperature Based on SMF-MMF-SMF-HCF-SMF Fiber Structure

In-Line Interferometric Temperature Sensor Based on Dual-Core Fiber

A temperature sensor based on the splicing of a core offset multi-mode fiber with two single mode fiber

A temperature sensor based on multi-beam capture and interference

Photonic Crystal Fiber Based on Surface Plasmon Resonance Used for Two Parameter Sensing for Magnetic Field and Temperature

Temperature-compensated Optical Fiber Magnetic Field Sensor with Cascaded Femtosecond Laser Micromachining Hollow Core Fiber and Fiber Loop

Electromagnetic Modelling of Fiber Sensors for Low-Cost and High Sensitivity Temperature Monitoring