Abstract:The Vernier effect created using an incorporated Lyot-Sagnac loop is used to create an ultra-high sensitivity temperature sensor based on a ring laser cavity. Unlike standard double Sagnac loop systems, the proposed sensor is fused into a single Sagnac loop by adjusting the welding angle between two polarization-maintaining fibers (PMFs) to achieve effective temperature sensitivity amplification. The PMFs are separated into two arms of 0.8 m and 1 m in length, with a 45° angle difference between the fast axes. The sensor's performance is examined both theoretically and experimentally. The experimental results reveal that the Vernier amplification effect can be achieved via PMF rotating shaft welding. The temperature sensitivity in the laser cavity can reach 2.391 nm/°C, which is increased by a factor of more than eight times compared with a single Sagnac loop structure (0.298 nm/°C) with a length of 0.8 m without the Vernier effect at temperatures ranging from 20 °C to 30 °C. Furthermore, unlike traditional optical fiber sensing that uses a broadband light source (BBS) for detection, which causes issues such as low signal-to-noise ratio and broad bandwidth, the Sagnac loop can be employed as a filter by inserting itself into the fiber ring laser (FRL) cavity. When the external parameters change, the laser is offset by the interference general modulation, allowing the external temperature to be monitored. The superior performance of signal-to-noise ratios of up to 50 dB and bandwidths of less than 0.2 nm is achieved. The proposed sensor has a simple structure and high sensitivity and is expected to play a role in biological cell activity monitoring.

Temperature Sensor Based on Er-Doped Cascaded-Peanut Taper Structure In-Line Interferometer in Fiber Ring Laser

In-Fiber Mach–Zehnder Interferometer Sensor Based on Er Doped Fiber Peanut Structure in Fiber Ring Laser

Temperature Sensor Based on Fiber Ring Laser with Cascaded Fiber Optic Sagnac Interferometers

Strain- and Temperature-Sensing Characteristics of Fiber Ring Laser Sensor With Cascaded Fabry-Perot Interferometer and FBG

Temperature Sensor Cascading Reflective Fabry-Perot Cavity with Microring Resonator

Erbium-doped Fiber Laser Based on FBGs-FP Fabricated by Femtosecond Laser for Temperature and Strain Sensing

EDF laser temperature sensor using double-pass cascaded-chirped long-period fiber grating in sigma-cavity configuration

In-Fiber Mach–Zehnder Interferometer Based on Er Doped Up-Taper and Peanut-Shaped Fiber Structure in Fiber Ring Laser

Temperature Sensing Scheme Based on Fiber Ring Microwave Photonic Filter with Erbium Doped Fiber Amplification

Integrated Fiber Ring Laser Temperature Sensor Based on Vernier Effect with Lyot-Sagnac Interferometer

Erbium-doped Fiber Laser Based on Intermodal Interference Between Single-Mode Fiber and Suspended Core Fiber for Strain and Temperature Sensing

A Fiber Ring Cavity Laser Temperature Sensor Based on Polymer-Coated No-Core Fiber as Tunable Filter

Adaptive Fiber-Ring Lasers Based on Isopropanol Filled Microfiber Coupler for High-Sensitivity Temperature Sensing

Refractive Index and Temperature Sensor Based on Fiber Ring Laser with STCS Fiber Structure

Temperature Sensing Using Four-Wavelength Fabry–Pérot Brillouin–erbium Fiber Laser by Low Frequency Detection

Polarimetric Fiber Laser Sensor with Enhanced Sensitivity by Utilizing a Hi-Bi EDF

A Fiber Laser Temperature-Sensing System with Customizable Sensitivity Based on Beat Frequency Demodulation Method

Narrow linewidth erbium-doped fiber laser incorporating with photonic crystal fiber based Fabry–Pérot interferometer for temperature sensing applications

Twin-Core Fiber-Based Erbium-Doped Fiber Laser Sensor for Decoupling Measurement of Temperature and Strain

Envelope-based Demodulation for Temperature Sensing with Cascaded Fiber Fabry-Perot Interferometers

High-Resolution Temperature Sensor Through Measuring the Frequency Shift of Single-Frequency Erbium-Doped Fiber Ring Laser