Temperature-compensated Optical Fiber Magnetic Field Sensor with Cascaded Femtosecond Laser Micromachining Hollow Core Fiber and Fiber Loop

Xi-xin Wang,Ri-qing Lv,Yong Zhao,Jian Zhao,Zi-ting Lin

DOI: https://doi.org/10.1016/j.optlastec.2022.108748

2023-01-01

Abstract:A fiber magnetic field sensor with temperature compensation is put forward and experimentally verified by utilizing Fabry-Perot interferometer (FPI) and multimode interferometer (MI). The FPI with ultra-short cavity (about 20 mu m), which is proposed to improve the spectrum contrast after being filled with oil-based magnetic fluids (MF) and achieve the sensing of magnetic field, is drilled through by femtosecond laser. The FPI is composed of two sections of single mode fiber and a hollow core fiber, which is named as single mode fiber -hollow core fiber-single mode fiber (SHS). The MI composed of the coated-fiber-loop, which is only sensitive to temperature, is proposed to compensate the temperature on the sensing of magnetic field. The fiber loop is fabricated by only bending a section of coated single mode fiber (SMF). According to the experiment results, the spectrum visibility of magnetic field sensing part can be improved by 3.1 times by shortening the Fabry-Perot (FP) cavity length. The interference wavelength increases nonlinearly from 0 to 69.1 Gs while linearly from 69.1 to 137.7 Gs. In addition, its temperature sensitivity is-0.20 nm/degrees C from 23.0 to 42.9 degrees C. Moreover, the sensitivity of MI is-2.31 nm/degrees C from 23.0 to 42.9 degrees C. It could be used to compensate the temperature influence effectively. The structure boasts characteristics of simple manufacture, low cost and highly-sensitive, which can be applied in the fields of magnetic field sensing.