Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Temperature Sensing Characteristics Based on Up-Taper and Single Mode–Multimode Fiber Structure

Tapered Optical Fiber Sensing Technology

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A High-Temperature Humidity Sensor Based on a Singlemode-Side Polished Multimode-Singlemode Fiber Structure

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Single-Mode-Multimode-Single-Mode Fibre Structure for Sensing Applications: A Review

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

A temperature sensor based on the splicing of a core offset multi-mode fiber with two single mode fiber

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

High-Sensitivity Temperature Fiber Sensor Based on Two Cascaded Balloon-shaped Bent SMFs integrated with a Seven-core fiber

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Temperature-Compensated Highly Sensitive Reflective SPR Fiber Sensor Based on Tapered Seven-Core Fiber

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Highly Sensitive and Fast Surface Temperature Sensor Based on Standard Single-Mode Fiber Using Double Heterodyne Interference Technology

High-sensitivity Fiber Liquid Crystals Temperature Sensor with Tiny Size and Simple Tapered Structure

A Spiral-Polished Fiber Sensor for Strain and Temperature Measurement

High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

A Temperature Sensor Based on Composite Optical Waveguide