Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact Balun Filter Using Coupled Resonators

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Design of a Substrate Integrated Waveguide Balun Filter Based on Three-Port Coupled-Resonator Circuit Model

Compact CMOS Baluns for the 4–10 GHz Band Applications

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Synthesis and Design of LTCC Filtering Balun With Wide Stopband

A compact wide stopband microstrip bandpass filter using quarter-wavelength shorted coupled-lines

Low-loss Balun Design and Compact Modeling for RF/millimeter-wave Circuit Application

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Compact dual-band balanced bandpass filter using CRLH resonator with intrinsic common-mode suppression and multiple transmission zeros

Broadband Compact Model for On-Chip Mm-Wave Transformers and Baluns with Emphasis on Capacitive Coupling Effects

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts