Abstract:Superplasticizers, polyacrylate latexes and asphalt emulsions were employed to investigate the influences of chemical admixtures with different sizes on the pore structure and impermeability of hardened cement pastes. With different admixture types and contents, pore structure and impermeability of specimens cured for 28 days were tested by mercury intrusion porosimetry and alternating current impedance, respectively. Scanning electron microscopy was also used to observe the microstructure of fresh and hardened pastes. The results show that, porosity, average pore size and inkbottle pores volume in the hardened cement pastes as well as permeability presented slight decrease with the increase in the content of superplasticizers. For the specimens with low latex content, the pore size in the hardened cement paste remained unchanged, or was coarsened, and the compactness and impermeability declined; for those with high latex content, the pore size was refined and compactness and impermeability were enhanced. Both of the compactness and impermeability increased with the increase in asphalt emulsion content. At the same content, the latex Ll, having smaller particle size was more effective than latex L2 and, the anionic asphalt emulsion was more effective than cationic asphalt emulsion on improving pore structure and impermeability, respectively. It was accepted that chemical admixtures were able to improve the flowability of fresh paste by enhancing the dispersion of cement grains, further the effects were extended to affect the pore structure and impermeability of hardened one. Meanwhile, the polymer was also effective to compact the interfacial zone between phases by filling up the pore space, which would lead to more compact structure of hardened paste. For the same type of chemical admixture at low content, the pore structure and impermeability were mainly influenced by the dispersion of cement grains, while at high content, the filling effect become dominant. For different types of chemical admixtures with the same filling effect, the better dispersion of cement grains would result in finer pore structure and higher impermeability.

Influence of paste coating thickness on the compressive strength, permeability, and mesostructure of permeable concrete

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Maximum Paste Coating Thickness Without Voids Clogging of Pervious Concrete and Its Relationship to the Rheological Properties of Cement Paste

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Influences Of Chemical Admixtures With Different Sizes On Pore Structure And Impermeability Of The Hardened Cement

Computed permeability for cement paste subject to freeze-thaw cycles at early ages

Research on the Permeability and Pore Structure Distribution Characteristics of High-Performance Mortar for Surface Treatment of Bridge Piers and Columns

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Enhancing both strength and permeability of pervious concrete by optimizing pore structure: An experimental study

Effect of the Paste Coating Layer and Mortar Coating Layer on the Properties of Fresh Self-Compacting Concrete

Fractal Characteristics of Pore Structure of Hardened Cement Paste Prepared by Pressurized Compact Molding

Coarse Aggregate Effectiveness in Concrete: Quantitative Models Study on Paste Thickness, Mortar Thickness and Compressive Strength

Effect of Epoxy Impregnation on Characterizing Microstructure and Micromechanical Properties of Concrete by Different Techniques

A Novel Method to Predict the Mesostructure and Performance of Pervious Concrete

Evaluation of pore size distribution and permeability reduction behavior in pervious concrete

Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis

Influences of PCE Superplasticizer on the Pore Structure and the Impermeability of Hardened Cementitious Materials

Improvement on Microstructure of Concrete by Polycarboxylate Superplasticizer (pce) and Its Influence on Durability of Concrete

Influence of Mineral Admixtures on the Performance of Pervious Concrete and Microscopic Research