Abstract:Permeability is a fundamental physical property of a cement-based material and is closely related to its pore structure. This study developed an improved model for permeability prediction of cementitious materials with a function of the pore size distribution (PSD), in which PSD is simulated from single and compound lognormal distribution functions, respectively. The efficiency of the improved model is demonstrated by calculating permeability for mortars and pastes available in the literature. It is found that, first, for cementitious materials with unimodal PSD, the single lognormal distribution function is adequate to describe the pore structures. In contrast, for cementing mixtures presenting multimodal PSD, the compounded lognormal distribution function is highly recommended to cover a wide range of pore components. Second, the permeability model based on the compound PSD can predict well permeability to gas intrusion, whereas the single PSD-based model is applicable for calculating permeability via water intrusion. Furthermore, slippage effect and water saturation degree are introduced in the PSD-based model. Results prove that the corrected gas permeability model from the compound PSD performs well in estimating the gas permeability in unsaturated states. Finally, the compound PSD-based model is extended by considering varying porosities and relative humidities, which can be used to quantitively describe permeability when cementitious materials undergoing pore structure degradation induced by durability issues.

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Influence of evaporation rate on pore size distribution, water loss, and early-age drying shrinkage of cement paste after the initial setting

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Statistical Modeling of Pore Structures in Fresh Cement Paste Based on Dispersion Theory of Random Two-Phase Media

Characterizing Pore Structure of Cement Blend Pastes Using Water Vapor Sorption Analysis

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Pore Size Distribution of Cement Mortar Prepared with Crushed Limestone Sand

Continuous Characterization of Pore Structure in Cement Paste

Experimental Study and Analytical Model for Pore Structure of Hydrated Cement Paste

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Quantitative Relationship Between Pore Size Distribution and Compressive Strength of Cementitious Materials

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Improved Predictions of Permeability Properties in Cement-Based Materials: A Comparative Study of Pore Size Distribution-Based Models

A New Analytical Method to Predict Permeability Properties of Cementitious Mortars: the Impacts of Pore Structure Evolutions and Relative Humidity Variations

Quantitative Characterization of Pore Morphology in Hardened Cement Paste Via SEM-BSE Image Analysis

Statistical Modelling of Compressive Strength Controlled by Porosity and Pore Size Distribution for Cementitious Materials

A Multi-Scale Framework for Modelling Effective Gas Diffusivity in Dry Cement Paste: Combined Effects of Surface, Knudsen and Molecular Diffusion

Association of macroscopic laboratory testing and micromechanics modelling for the evaluation of the poroelastic parameters of a hardened cement paste

Investigations on Three-Dimensional Pore-Structure in Cementitious Materials Using Metal Centrifugation Porosimetry and Simulation

Experimental Investigation On The Influence Of Multiscale Pores On The Static And Dynamic Splitting Tensile Strength Of Cementitious Materials Based On The Virtual Pore Method