Abstract:Pervious concrete is a type of sustainable construction material used in pavement engineering due to its advantages in water permeability, skid resistance, and sound absorption performance. This study investigated the pore characteristics of five types of pervious concrete, along with the uniaxial compression behaviors and semi-circular bending (SCB) fracture performance. The critical stress intensity factor was obtained using the equivalent energy approach. Gray relational analysis was conducted between the mechanical performance and the pore characteristics. Pore indicators include the effective porosity, 2D porosity along the specimen height, 2D coordination number (CN) along the specimen height, 2D pore radius, 2D specific surface area, 3D CN, 3D pore radius, and 3D virtual porosity. Results indicated that from M1 to M3, when cement mortar content decreased from 520 kg/m(3) to 408 kg/m(3), the effective porosity increased from 18.95% to 27.43%, and the compressive strength and fracture toughness decreased obviously. For the same type of pervious concrete mixture, with the increase of notch length, the critical stress intensity factor decreased accordingly. The 2D porosity distribution, 2D pore size distribution, and 2D CN distribution presented a symmetrical trend of decreasing, then increasing, and then decreasing with the increase of specimen height. Aggregate with the gradation within the range of 9.5 mm to 19.0 mm generated a higher compressive strength, larger effective porosity and larger pore size compared to the gradation of 4.75 mm similar to 9.5 mm. The results of CN and pore radius generated from the 3D pore network model were larger than the corresponding 2D values. The gray correlation analysis revealed that 2D pore radius and 3D pore radius played critical effects on the uniaxial compressive strength and fracture resistance, while 2D CN and 3D CN were the least significant factors affecting the mechanical performance.

A simple method for estimation of permeability of concrete from the compressive strength and pore size distribution based on literature survey

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Implication of pore size distribution parameters on compressive strength, permeability and hydraulic diffusivity of concrete

An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Influence of Water Cement Ratio and Curing on the Permeability and Structure of Hardened Cement Paste and Concrete

Concrete Gas Permeability from Different Methods: Correlation Analysis

Gas Permeability and Electrical Conductivity of Structural Concretes: Impact of Pore Structure and Pore Saturation

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Gray Correlation Analysis Between Mechanical Performance and Pore Characteristics of Permeable Concrete

Fractal Dimension of Concrete Incorporating Silica Fume and Its Correlations to Pore Structure, Strength and Permeability

Quantitative study on the influence of fly ash content, saturation degree and interface transition zone on the permeability of cement-based materials

THE IMPORTANCE OF GAS PERMEABILITY IN ADDITION TO THE COMPRESSIVE STRENGTH OF CONCRETE

Experimental Investigation and Bayesian Assessment for Permeability Characteristics of Lightweight Ceramsite Concrete

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Numerical and Statistical Analysis of Permeability of Concrete As a Random Heterogeneous Composite

A new method for predicting compressive strength of cement-based materials

Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation