Abstract:This paper describes the design, functioning and use of an integrated mixer that relies on air flux to agitate microliter entities of fluid in an embedded microfluidic cavity. The system was fabricated from multiple layers of a thermoplastic elastomer and features circuits for both liquid and air supply along with pneumatic valves for process control. Internally-dyed polymer particles have been used to visualize flow within the fluid phase during agitation. Numerical modelling of the micromixer revealed an overall efficacy of 10(-1) to 10(-2) for momentum transfer at the air-water interface. Simulation of air vortex dynamics showed dependency of the flow pattern on the velocity of the flux entering the cavity. Three bioanalytical assays have been performed as proof-of-concept demonstrations. In a first assay, cells of Listeria monocytogenes were combined with magnetic nanoparticles (NPs), resulting in high-density coverage of the bacteria's surface with NPs after 1 min of agitation. This finding is contrasted by a control experiment without agitation for which interaction between bacteria and NPs remains low. In a second one, capture and release of genomic DNA from fungi through adsorption onto magnetic beads was tested and shown to be improved by agitation compared to non-agitated controls. A third assay finally involved fluorescently-labelled target oligonucleotide strands and polystyrene particles modified with DNA capture probes to perform detection of nucleic acids on beads. Excellent selectivity was obtained in a competitive hybridization process using a multiplexed micromixer chip design.

Glass Chaotic Chip Mixer And Use In Chip Flow Chemiluminescence Detection

Hydrodynamic and electrodynamic flow mixing in a novel total glass chip mixer with streamline herringbone pattern

Total Glass Microfluidic Chip Flow Cell for Multiple Detections

Preparation of hybrid soda-lime/quartz glass chips with wettability-patterned channels for manipulation of flow profiles in droplet-based analytical systems.

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Rapid Preparation and Characterization of Chaotic Mixing Chip Integrated Indium Tin Oxide Electrodes

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Integration of a Flow-Type Chemiluminescence Detector on a Glass Electrophoresis Chip.

Fabrication of pneumatic micropump on glass-PDMS microfluidic chip and its application to chemiluminescence detection

A Microfluidic Mixer of High Throughput Fabricated in Glass Using Femtosecond Laser Micromachining Combined with Glass Bonding.

A Simplified Microfabrication Technology For Production Of Glass Microfluidic Chips

Integrated air stream micromixer for performing bioanalytical assays on a plastic chip.

Highly Sensitive Chemiluminescence Detection For Pdms/Glass Micro-Chip Electrophoresis

Femtosecond Laser Fabrication of a Lab-on-a-Chip in Glass for Enhancing Detection Sensitivity

Integration of On-Chip Glass Microfluidic System by a Chemical Foaming Process (CFP)

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Method For Fabrication Of Microfluidic Glass Chips

Fabrication Of Microfluidic Chips By An Ultrasonic Micromachining With Wet-Etch Smoothing Method On Glass Substrates

Study on a Low-Cost and Fast Fabrication Method of Glass Microfluidic Chips