Abstract:Multipass welding of high strength steels used for fabrication and joining of transmission pipelines presents a number of metallurgical challenges. A key concern is both the strength and toughness of the heat affected zone (HAZ) adjacent to both seam and girth welds. In this work, a systematic study has been conducted on regions of the heat affected zone in the base metal where the first welding pass produces a thermal excursion which results in a coarse-grained heat affected zone (CGHAZ). The subsequent weld pass involves intercritical annealing of this region, i.e. a microstructure associated with intercritically reheated coarse grain heat affected zone (ICCGHAZ). The small ICCGHAZ region is often identified as being particularly susceptible to crack initiation. This work was undertaken to understand microstructure development in this zone and how the ICCGHAZ may affect the overall performance of the HAZ. Gleeble thermomechanical simulations have been conducted to produce bulk samples representative of different welding scenarios. Charpy impact tests and tensile tests have been performed over a range of temperatures. It was found that when a continuous necklace of martensite-austenite islands form on the prior austenite grain boundaries (i.e. for a M/A fraction of ≈10%), the Charpy impact toughness energy is dramatically decreased and the ductile brittle transition temperature is significantly raised. Detailed studies on the secondary cracks have been conducted to examine the fracture mechanisms in the different microstructures. The results show that the lower bainite microstructures obtained after the 1st thermal treatment, representative of CGHAZ have excellent impact properties. The impact toughness of the microstructures typical of ICCGHAZ is strongly dependent on the composition as well as morphology and spatial distribution of the resulting martensite-austenite (M/A) islands transformed from inter-critically formed austenite. This zone can play a significant role in fracture initiation and thus needs to be considered in alloy and welding process designs.

The Notched C-Ring Test To Evaluate Reheat Cracking Susceptibility Of Cghaz In 21/4cr-1m0-1/4v Steel Welded Joints

Method and Criteria to Evaluate Reheat Cracking Susceptibility

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Experimental Investigation of Fatigue Crack Growth Behavior of the 2.25cr1mo0.25v Steel Welded Joint Used in Hydrogenation Reactors

Crack Growth Analysis Of High-Pressure Equipment For Hydrogen Storage

Influence of Second Welding Thermal Cycle on Reheat Cracking Sensitivity of CGHAZ in T23 Steel

Establishment of Thermal Ductile Fracture Criterion for As-Cast 42CrMo Steel and Its Application in Hot Ring Rolling Process

Cause Analysis and Preventive Measures against Cracks in 15Cr1Mo1V Steel Welded Joint in Service

A New Understanding of Hydrogen-Assisted Cracking of Coarse-Grained Heat-Affected Zone in X65 Pipeline Steel Through {110} Lath Bainite Boundary Texture

Investigation Of Fracture Toughness Of Heat Affected Zone Of 2.25cr-1mo-0.25v Steel Pressure Equipment

Mechanical Behaviour of Intercritically Reheated Coarse-Grained Heat Affected Zone in High Strength Line Pipe Steels

Failure Analysis of Weld Cracking in a Thick-Walled 2.25Cr-1Mo Steel Pressure Vessel

Pitting Corrosion and Stress Corrosion Cracking Around Heat Affected Zone in Welded Joint of CrNiMoV Rotor Steel in Chloridized High Temperature Water

Effect Of Welding Heat Input On The Microstructure And Toughness In Simulated Cghaz Of 800 Mpa-Grade Steel For Hydropower Penstocks

Pitting Behavior of Welded Joint and the Role of Carbon Ring in Improving Corrosion Resistance

Near-threshold fatigue crack growth behavior of 10% Cr martensitic steel welded joint with 9% Cr weld metal in high temperature air

Influence of Microstructure Evolution on Reheat Cracking Behavior of T23 Steel Weld Joint

Research on the micro zone strength and strain hardening behavior in the 30Cr2Ni4MoV rotor welded joint

Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes

Microstructure and Fracture Characteristics of HAZs of Ca- deoxidized Steel Plates with Different Ti/N Ratios After HHIW

Susceptibility to Welding Cold Cracking of 30Crmnsini2a