Abstract:2.25Cr-1Mo-0.25 V steel has been widely used to manufacture hydro-processing equipment operating under harsh environments for its good creep performance. Warm bending, a common fabricating process of 2.25Cr-1Mo-0.25 V steel ring shells, inevitably changes the creep property of 2.25Cr-1Mo-0.25 V steel, but its detailed effect still remains obscure. In this work, we experimentally investigated the impact of warm bending on the microstructure and creep behavior of 2.25Cr-1Mo-0.25 V steel. First, a series of creep rupture tests were carried out at 482 °C and 350 MPa, in which test materials were extracted from an actually fabricated ring shell and its raw plate. Thereafter, the microstructures of test materials were semi-quantitatively analyzed by various characterization techniques, such as electron backscatter diffraction (EBSD) and three-dimensional high-resolution X-ray computed tomography (3D μ-XCT). Finally, warm forming induced microstructural degradation as well as their implication for creep was discussed in detail. Creep rupture tests showed that warm bending leads to a significant decrease in creep lifetime at the surface region of virgin plate but a slight decline at the central region of virgin plate. An inhomogeneous creep resistance distribution was thereby revealed along the thickness direction of the ring shell, which could not be completely eliminated by subsequent tempering at 705 °C for 8 h. Moreover, microstructural observations demonstrated that warm deformation leads to multiple microstructural deterioration, including carbide coarsening, ferrite matrix softening, void defect increasing, etc. Their combined action appears to accelerate the creep fracture behavior of 2.25Cr-1Mo-0.25 V steel. This work will contribute to the long-term safety and integrity assessment of 2.25Cr-1Mo-0.25 V steel structures. Graphical abstract

Investigation Of Fracture Toughness Of Heat Affected Zone Of 2.25cr-1mo-0.25v Steel Pressure Equipment

Assessment of Toughness in Long Term Service Crmo Low Alloy Steel by Fracture Toughness and Small Punch Test

Investigation Of The Influence Of Pre-Charged Hydrogen On Fracture Toughness Of As-Received 2.25cr1mo0.25v Steel And Weld

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Effect of Hydrogen on Fracture Toughness Behavior of 2.25Cr-1Mo-0.25V Steel

Experimental Investigation of the Effect of Hydrogen on Fracture Toughness of 2.25Cr-1Mo-0.25v Steel and Welds after Annealing

Experimental study on fracture toughness of high-strength structural steel and its butt weld

Experimental Investigation of Fatigue Crack Growth Behavior of the 2.25cr1mo0.25v Steel Welded Joint Used in Hydrogenation Reactors

Hydrogen Embrittlement Susceptibility of Temper Embrittled 2.25Cr-1Mo Steel

Investigation of Local Brittle Zone in Multipass Welded Joint of NiCrMoV Steel with Heavy Section

Experimental study on fracture toughness of high-strength structural steel and its

Tempering embrittlement of 2.25Cr-1Mo steel for, a long term of service

Failure Analysis of Weld Cracking in a Thick-Walled 2.25Cr-1Mo Steel Pressure Vessel

Improving the Weld Heat-Affected-Zone (HAZ) Toughness of High-Strength Thick-Walled Line Pipes

Creep Rupture Behavior of 2.25cr1mo0.25v Steel and Weld for Hydrogenation Reactors under Different Stress Levels

On the Creep Fracture Toughness of 2¼cr1mo Steel

High-Temperature Tensile and Creep Behavior in a CrMoV Steel and Weld Metal

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

INVESTIGATION OF HYDROGEN DIFFUSION CHARACTERISTICS OF THE HEAT AFFECTED ZONE OF 2.25CR-1MO-0.25V STEEL BY AN ELECTROCHEMICAL PERMEATION METHOD

Effect of High Temperature Deformation on the Microstructure, Mechanical Properties and Hydrogen Embrittlement of 2.25Cr–1mo-0.25 V Steel

Study on Local Brittle Zone Phenomena of Intercritically Reheated Coarse-Grained Heat-Affected Zone in Pipeline Steels