Abstract:The dual-cylinder opposed linear compressor (DOLC) contains a couple of symmetrical gas loads on the two sides of the movement components. Because the gas loads are symmetrical, the balanced position of movement components will not be offset by gas force during the operating process, and piston displacement can be detected and controlled more easily. Based on the kinetics and thermodynamics theory, the non-linear gas load of the DOLC was linearized by the Fourier method. The relationship between the supply voltage and displacement is presented. Through air compression experiments, the operation features of the DOLC with different syntonic spring groups were analyzed. The performance of the DOLC was considerably affected by work conditions and the stiffness of syntonic spring groups; the closer the work condition was to the sympathetic vibration, the higher the observed efficiency of the DOLC. A jump, hysteresis, and an unstable phenomenon in the process of voltage regulation occurred around sympathetic vibration conditions. In the process of increasing voltage on a certain discharge pressure condition, the displacement jump phenomenon occurred when the intrinsic frequency approacheds power frequency, causing the discharge pressure to drop synchronously. In the process of decreasing voltage on the lower discharge pressure condition, the displacement shrink phenomenon occurred when the intrinsic frequency approached power frequency. Because sympathetic vibration conditions changed with discharge pressures, a hysteresis district existed between the displacement jump point and shrink point. The DOLC worked unstably on the hysteresis district because the discharge pressure fluctuated between the two values. To make the DOLC work stably on higher efficiency, the intrinsic frequency should be configured to a slightly larger value than the power frequency by setting the syntonic spring groups and the mass of movement components to the ratings on the work conditions. Controlling the power frequency after is needed to adhere to the intrinsic frequency of the variable work conditions.

Theoretical and Experimental Investigations on a 12 Kw Oxford-type Dual-Opposed Moving-Coil Linear Compressor

Design and Test on Moving-Magnet Linear Compressor

Development of a Linear Compressor for Two-Stage Pulse Tube Cryocoolers

Theoretical Modeling and Experimental Verification of the Motor Design for a 500 G Micro Moving-Coil Linear Compressor Operating at 90–140 Hz

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Experimental Investigation and Performance Analysis of a Dual-Cylinder Opposed Linear Compressor

Characterization of an Embraco Oil-Free Linear Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Study of the moving offset characteristics of multi-loop moving coil linear compressor

Operational optimisation of a novel dual-piston linear compressor: Simulation and experiment

Studies on Moving Coil Linear Compressor Used for Refrigerator

Acoustic Impedance Characteristics of Linear Compressors

Research on Linear Motor for Linear Compressor

The Performance of A Linear Compressor with Triangle Flexure Bearings

A Novel Oil-free Dual Piston Compressor Driven by a Moving Coil Linear Motor with Capacity Regulation Using R134a

Performance Testing of Linear Compressors with Rc Approach

Performance Simulation Analysis of a Novel Dual-piston Two-Stage Carbon Dioxide Linear Compressor

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Modeling and analysis of a novel integrated linear oscillatory compressor

Modeling and analysis of moving-magnet linear motor with no inner-teeth for linear compressor

Investigation of an integrative transverse-flux linear compressor