Abstract:In recent years, the concrete-filled wide rectangular steel tubular (CFWRST) columns, whose cross-sectional width-to-depth ratio exceeds 2.0, is widely utilized in medium- and high-rise buildings. The global buckling behavior of CFWRST columns is of great concern in practical projects due to the multi-story fabrication and erection. In this paper, the stability performance of CFWRST columns is investigated. A refined finite element (FE) model is established for numerical simulation, and the ultimate resistances, load-displacement curves and failure modes obtained from FE models are compared with previous test results to verify the validity of the FE model. Main factors, including geometric dimensions, steel tube thickness, steel strength and concrete strength, are studied through parametric analysis. By comparing the typical equations specified in several existing design codes with a large number of numerical simulation results, it is found that Australian code (AS2327-2017), American code (AISC360-2016) and European code (EC4-2004) fail to predict the ultimate resistance of slender CFWRST columns under axial compression, and about half of the prediction results lead to unsafe designs. Meanwhile, the solutions of Chinese codes (GB50936-2014 and GB50017-2017) could conservatively predict the behavior of CFWRST columns within the deviation of 10% for most numerical results. Thus, these two codes are considered to provide valuable references for designing the CFWRST columns in practice.

Comparison Of Design Methods For Circular Concrete Filled Steel Tubie Beam Columns In Different Codes

Comparison of Design Methods of Load-Carrying Capacity for Circular Concrete - Filled Steel Tube Beam Columns in Typical Codes Worldwide

Comparison between Chinese and three worldwide codes for circular concrete-filled steel tube members

Comparison of design methods of load-carrying capacity of compressive members of CFST in typical codes worldwide

COMPARISON OF EFFECTIVE LENGTH COEFFICIENT OF CONSTANT-SECTION STEEL FRAME-COLUMN BETWEEN CHINESE AND AMERICAN DESIGN SPECIFICATIONS

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Calculations of the ultimate bearing capacity of concrete-filled steel tubular beam-columns with circular hollow section

Comparison of typical design codes and simplified method of concrete-filled rectangular hollow section (RHS) steel tube with slender plate

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

A Comparison Of The Design Codes For The Fire Resistance Of Concrete Filled Steel Tubular (Cfst) Columns

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Design of Concrete Filled Square Steel Tubular Members

Calculation of bearing capacity of concrete filled steel rectangular hollow sectional compression-bending members under cyclic loading

Compressive Behavior and Design Calculations of CFST Slender Columns with Latticed Annular Steel Part

Comparative Study on Design Methods for Stainless Steel Flexural Members in Different Codes

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

INTRODUCTION AND COMPARISON OF CALCULATION METHODS OF THE STIFFNESS OF CONCRETE-FILLED CIRCULAR STEEL TUBES IN DIFFERENT CODES

COMPARATIVE STUDY OF DESIGN METHODS FOR STEEL COLUMNS STRENGTHENED BY WELDING WHILE UNDER AXIAL AND ECCENTRIC LOAD IN DIFFERENT CODES

Brief Introduction of "Technical Specification of Hollow Concrete-Filled Steel Tubular Structures " CECS 254∶2009

Design of Concrete-Filled Steel Tubular Members According to the Australian Standard As 5100 Model and Calibration

Performance of steel-reinforced square CFST stub columns loaded in axial compression: Experiments