Abstract:Advances in Structural Engineering, Ahead of Print. In the companion paper, test results were presented to explore the flexural performance of cold-formed ferritic stainless steel (FSS) closed built-up beams. Each specimen was fabricated by joining two lipped channels in a face-to-face configuration and securing them with spot welds at intermediate points along the beam span. Sectional aspect ratio, compression flange's sectional slenderness and moment gradient were the key parameters varied to explore their influence on the flexural response of such members through tests. The current paper establishes a simplified finite element (FE) model of cold-formed FSS closed built-up beams and verifies it against the test results. Further, an extensive parametric study is carried out using the validated FE model to generate a large pool of data points. A wider database comprising of test results, numerical results obtained from this study and numerical results available in the companion paper were used to critically examine the adequacy of the current Australian Specifications (AS/NZ), American Standard (SEI/ASCE-8), European Code (EN 1993-1-4), Modified Eurocode approach suggested by Gardner and Theofanous, and Direct Strength Method (DSM) in North American Specification (AISI-S100: 2016), Modified DSM approach proposed by the authors in the literature and Continuous Strength Method (CSM) for cold-formed steel (CFS) flexural members. This makes the current study the first to extensively assess the accuracy of the various design guidelines available in the codes and other relevant literature, which explicitly highlighted their grave limitations. Accordingly, through suitable modifications and recommendations, new design rules are proposed to reliably and safely predict the flexural capacity of cold-formed FSS closed built-up beams.

Comparative Study on Design Methods for Stainless Steel Flexural Members in Different Codes

Comparative Study on Design Methods for Stainless Steel Bolted Connection in Different Codes

COMPARATIVE STUDY ON DESIGN METHODS FOR LOCAL STABILITY OF HIGH STRENGTH STEEL FLEXURAL MEMBERS IN DIFFERENT CODES

A RESTUDY ON STABILITY OF STEEL BEAMS(Ⅲ):COMPARISON AMONG CODES AND RELIABILITY ANALYSIS

COMPARISON OF EFFECTIVE LENGTH COEFFICIENT OF CONSTANT-SECTION STEEL FRAME-COLUMN BETWEEN CHINESE AND AMERICAN DESIGN SPECIFICATIONS

Comparisons of Design Methods for Bolted Connection of Stainless Steel Structures

Research Situation of the Bearing Behavior of Stainless Steel Flexural Members

Comparative Study On Design Methods For Steel Structural Members Strengthened By Increasing The Section Area While Under Load In Different Codes

Comparison study of design strength in steel design codes of different countries

COMPARATIVE STUDY OF DESIGN METHODS FOR STEEL COLUMNS STRENGTHENED BY WELDING WHILE UNDER AXIAL AND ECCENTRIC LOAD IN DIFFERENT CODES

COMPARISON STUDY OF HIGH STRENGTH STEEL WELD CONNECTION DESIGN METHODS IN STEEL DESING CODES OF DIFFERENT COUNTRY( DRAFT)

Analysis of Flexural Buckling Capacity of Stainless Steel Columns under Axial Compression

Analysis on Overall Stability of Stainless Steel Beams with Welded I-Section

Comparative Study on Existing Design Methods for Flange-Plate Connections of Steel Tubular Structures

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Comparative Study on Design Methods for Unstiffened Steel Plate Shear Wall in Different Codes

Reliable design rules for cold-formed ferritic stainless steel closed built-up beams

Numerical analysis of overall stability of unbraced stainless steel simply-supported beams with fabricated I-section

A Comparison of Design Methods for Flexure Strength of RC Beams Between Chinese and American Design Codes for RC Structures

Comparative Study on the Calculation Theory for the Flexural Capacity of Steel Reinforced Concrete Beams