Abstract:Due to its super plasticity, low weight, and high mechanical resistance properties, generally, Ti6Al4V is used for aeronautical applications. However, it has low resistance to plastic shearing. In addition, it has poor wear resistance. For these reasons, a lot of techniques have been developed to improve its wear resistance. Investigations of microstructure and interfacial reactions of diffusion bonding of Ni and Ti6Al4V materials have been performed experimentally. Ni samples were prepared with 50 ± 5 µm Ni powders in cylindrical shape. For diffusion bonding, Ag foil was used for improving the interlayer and connection quality. Nickel and its alloys can be joined by using some different processes, and the use of an interlayer can further facilitate the joining process and improve the joint quality. The experiments were carried out under the protected atmosphere. Argon gas was used for protection. The experiments were performed under 5 MPa pressure for 60 min duration at 850 °C, 900 °C, and 950 °C thermal conditions. Investigations of metallurgical structure occurring in the interface areas were examined by optic analysis of EDS, SEM, and X-ray. The strength of the joints was tested by lap-shear tests. From observations, the best quality of the coalescence at interfaces was indicated at elevated temperatures.

Diffusion Bonding of Ti-6Al-4V to QAl 10-3-1.5 with Ni/Cu Interlayers

Study of diffusion bonding of Ti-6Al-4V and ZQSn10-10 with metal interlayer

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Technological studies on diffusion bonding of Ti-6Al-4V/Cu/QAl10-3-1.5

Diffusion Bonding of Ti-6Al-4V to ZQSn10-10 with Nickel Interlayer

Diffusion bonding of Ti-6Al-4V to ZQSn10-10 in vacuum

Diffusion Bonding of TiAl Intermetallic and Ti3AlC2 Ceramic: Interfacial Microstructure and Joining Properties

Nickel Interlayer on the Microstructure and Property of TC6 to Copper Alloy Diffusion Bonding

Diffusion bonding of Ti-6Al-4V to ZQSn10-10 with a copper Interlayer

Interfacial Microstructure and Joining Properties of TiAl/Ti3AlC2 Diffusion Bonded Joints Using Zr and Ni Foils As Interlayer

Interfacial microstructure and bonding strength of diffusion bonded TiAl/Ti/Nb/GH99 alloy joint

Interfacial Microstructure and Mechanical Properties of Diffusion Bonding of Ti3Al and Ti2AlNb Alloys

Diffusion Bonding Of Ti2alnb Alloy And High-Nb-Containing Tial Alloy: Interfacial Microstructure And Mechanical Properties

Investigation of Microstructure and Interfacial Reactions of Diffusion Bonding of Ni-Ti6Al4V Materials Joined by Using Ag Interlayer

Interfacial reaction and microstructure investigation of 4J36/Ni/Cu/V/TC4 diffusion-bonded joints

Dissimilar Diffusion Bonding Behaviour of Ti2AlNb Alloy and TiBw/Ti64 Composites Using the Ti Interlayer

Diffusion bonding of TiB3 cermet to TiAl intermetallic

Microstructure and Fracture Properties of Reaction-Assisted Diffusion Bonding of TiAl Intermetallic with Al/Ni Multilayer Foils

Microstructure and mechanical properties of Ti-6Al-4V/Ti-22Al-25Nb joint formed by diffusion bonding

Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical properties

Evolution and Formation Mechanism of the Interfacial Microstructure on Diffusion Bonded Joints of Single Crystal Ni-based Superalloys to Ti3AlC2 Ceramic with Ni Interlayer