Interfacial Microstructure and Joining Properties of TiAl/Ti3AlC2 Diffusion Bonded Joints Using Zr and Ni Foils As Interlayer
Jiakun Liu,Jian Cao,Xingtao Lin,Haiyan Chen,Jun Wang,Jicai Feng
DOI: https://doi.org/10.1016/j.vacuum.2013.10.024
IF: 4
2014-01-01
Vacuum
Abstract:Diffusion bonding of TiAl intermetallic to Ti3AlC2 ceramic was carried out using Zr and Ni foils as interlayer. The interfacial microstructure and joining properties were characterized by electronic microscopy investigation and shear strength test, respectively. The microstructure observations revealed that the general interfacial microstructure of the joint bonded at 850 degrees C was consisted of gamma-TiAl + iota(3)-Al3NiTi2, iota(3)-Al3NiTi2, iota(4)-AlNi2Ti, iota(4)-AlNi2Ti + Ni10Zr7, Ni7Zr2, Ni5Zr, Ni, Ni-3(Al,Ti), Ni-3(Al,Ti) + Ti3AlC2 from TiAl to Ti3AlC2. The bonding temperature had a great influence on the diffusion and reaction of Ni with other elements, generating different interfacial morphology of joints. The shear test results showed that the maximum shear strength reached 103.6 MPa. Fracture occurred along the ceramic substrate adjacent to the bonding interface, showing a brittle intergranular and transgranular fracture mode. (C) 2013 Elsevier Ltd. All rights reserved.