Abstract:The cyclic material properties of thin steel sheets are critical for accurate prediction of the structural response of the thin-walled steel elements. For the experimental study of the cyclic behaviors of thin steel sheets, we proposed a new anti-buckling device equipped with the disc-springs. This improvement aims to compensate the potential gaps between the fixtures and specimens under large plastic deformation so as to avoid the out-of-plane buckling. Furthermore, the negative influences derived from the transverse pressure and friction can be greatly minimized through the implementation of the disc-springs and the lubricated Teflon sheet, as indicated by the percentage errors of 0.31% and 0.08% for the external load and internal stress respectively. By virtue of this improved device, we perform 8 regular and 1 random cyclic testing with the Q345 steel sheet of the 6 mm thickness. It is noted that the smooth hysteresis loops feature no decrease in force under compression applied. Moreover, the sizes of hysteresis loops are dependent upon the current and maximum strain amplitude. The current strain amplitude controls the re-yielding rate, while the maximum value determines the saturated hardening stress. As for the ductile fracture initiation, the similar nominal stress-strain curves in the final tension stage among all cases and the considerably larger accumulated plastic strain than the one under monotonic loading imply the contribution of negative triaxiality to the decrease in the damage variable. Based on these observations, we develop a new cyclic plasticity and ductile fracture model, which is also programmed into the UMAT subroutine compatible with ABAQUS/Standard. By the comparison with the experimental results, the remarkable agreement of the predicted results demonstrates its validity in terms of the constitutive relationship, deformed shape of necking region and the fracture initiation under regular and particularly random cyclic loading.

Stress–Strain Behaviors in Large Plastic Strain Ranges under Monotonic Loading

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Mean Stress Relaxation During Low-cycle Fatigue of Aluminum Alloy 7050-T7451

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Grain-level Statistical Plasticity Analysis on Strain Cycle Fatigue of a FCC Metal

Cyclic Plasticity Of Aluminum In Large Plastic Strain Ranges

Ductile Fracture Model of Structural Steel under Ultra low Cycle Fatigue Loading

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Experiment and Constitutive Modeling on Cyclic Plasticity Behavior of LYP100 under Large Strain Range

The Characteristics of Plastic Flow and a Physically-Based Model for 3003 Al–Mn Alloy Upon a Wide Range of Strain Rates and Temperatures

Analysis of Meso-Inhomogeneous Deformation on a Metal Material Surface under Low-Cycle Fatigue

Prediction of Cyclic Behaviors of Mild Steel at Large Plastic Strain Using Coupon Test Results

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Integration Algorithm for a Modified Yoshida–Uemori Model to Simulate Cyclic Plasticity in Extremely Large Plastic Strain Ranges Up to Fracture

Experimental and modeling study of cyclic plasticity and ductile fracture of thin structural steel sheets

Experiments and Modeling of Shear Ultra-Low-cycle Fatigue of Structural Steel Considering Plastic Deformation Histories

Lower-order Mechanism-Based Strain Gradient Plastic Model Considering Stress Gradient Effect

Low Cycle Fatigue Life Evaluation of Notched Specimens Considering Strain Gradient