Abstract:Supercritical carbon dioxide (sCO 2 ) power cycles are attractive for renewable energy technologies as they exhibit high thermal efficiencies, compact components, and reduced cycle complexity and levelized cost of energy (LCOE) relative to traditional steam power cycles. Consequently, numerous studies have investigated different layouts and operating parameters in search of an optimal cycle configuration. Two cycle layouts provide promising results, namely the partial cooling with reheating (PCRH) cycle, and the recompression with intercooling and reheating (RCICRH) cycle. Both cycles utilise recuperators with high heat transfer rates and literature suggests that the cost for the recuperators may account for a significant portion of the total plant capital expenditure. When modelling the recuperator, most cycle comparative studies employ simplified recuperator models where heat exchanger effectiveness or conductance is utilised to approximate heat transfer. These models do not consider the effect of recuperator size and geometry on heat transfer and pressure drop in detail. In this work, for a concentrated solar power (CSP) application, the performance and component size requirements of the cycles are evaluated parametrically for different cycle mass flow split ratios, pressure ratios, and ratio of pressure ratios across the compressors using detailed discretised one-dimensional (1D) recuperator models. Furthermore, the geometry of these models are optimised (by volume) for straight and zigzag channel printed circuit heat exchangers (PCHEs), widely accepted as the most suitable for this application. Finally, a high-level cost comparison is conducted. The results show that if appropriate pressure drop assumptions are made, a simplified model approach yields valid cycle level results when compared with the results obtained using detailed models which consider practical recuperator geometry. However, the pressures and temperatures within the recuperator may not be predicted to a sufficient level of accuracy. In addition to providing clarity regarding the interplay between key cycle process parameters and cycle performance, straight channel PCHEs provide better thermofluid performance than zigzag channel PCHEs. Furthermore, the RCICRH cycle requires larger turbomachinery and a marginally higher capital outlay for the power cycle, but offers superior thermal efficiencies and requires smaller heat exchangers. For sCO 2 -CSP applications employing dry cooling, this suggests that the RCICRH cycle requires a smaller solar field and cooling system, and may therefore offer increased revenue in adverse weather conditions where direct normal irradiance (DNI) is low and/or ambient temperatures are high. However, the PCRH cycle requires a smaller solar receiver system, a smaller thermal energy storage (TES) system, and smaller turbomachinery, the cost savings of which may outweigh the benefits of the RCICRH cycle.

Thermo-Economic Analyses and Comparisons of Two S-CO2-Brayton-Cycle-Based Combined Power Cycles for Concentrated Solar Power Plants

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Efficient turbomachinery layout design and performance comparison of supercritical CO2 cycles for high-temperature concentrated solar power plants under peak-shaving scenarios

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Comprehensive analysis of combined power cycles driven by sCO 2 -based concentrated solar power: Energy, exergy, and exergoeconomic perspectives

Thermo-economic Assessment and Systematic Comparison of Combined Supercritical CO2 and Organic Rankine Cycle (SCO2-ORC) Systems for Solar Power Tower Plants

Comparing the partial cooling and recompression cycles for a 50 MWe sCO 2 CSP plant using detailed recuperator models

Review of Supercritical CO2 Power Cycles Integrated with CSP

Load Matching and Techno-Economic Analysis of CSP Plant with S–CO2 Brayton Cycle in CSP-PV-wind Hybrid System

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

Development of Operation Strategy for Recompression Supercritical CO2 Cycle with Intercooled Main Compressor under Off-Design Condition

Thermodynamic Optimization on Supercritical Carbon Dioxide Brayton Cycles to Achieve Combined Heat and Power Generation

Optimal Integration of Recompression Supercritical CO2 Brayton Cycle with Main Compression Intercooling in Solar Power Tower System Based on Exergoeconomic Approach

Exergoeconomic Analysis of Utilizing the Transcritical CO2 Cycle and the ORC for a Recompression Supercritical CO2 Cycle Waste Heat Recovery: A Comparative Study

Performance Comparison of SPT Systems Integrated with Various Supercritical CO2-based Mixture Brayton Cycles Based on Multi-Objective Optimization

Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

A Study of New Method and Comprehensive Evaluation on the Improved Performance of Solar Power Tower Plant with the CO2-based Mixture Cycles

Thermodynamic and Exergoeconomic Analysis of a Supercritical CO2 Cycle Integrated with a LiBr-H2O Absorption Heat Pump for Combined Heat and Power Generation

Multi-objective optimization of supercritical CO 2 Brayton cycles for coal-fired power generation with two waste heat recovery schemes