Abstract:Supercritical carbon dioxide (sCO 2 ) power cycles are attractive for renewable energy technologies as they exhibit high thermal efficiencies, compact components, and reduced cycle complexity and levelized cost of energy (LCOE) relative to traditional steam power cycles. Consequently, numerous studies have investigated different layouts and operating parameters in search of an optimal cycle configuration. Two cycle layouts provide promising results, namely the partial cooling with reheating (PCRH) cycle, and the recompression with intercooling and reheating (RCICRH) cycle. Both cycles utilise recuperators with high heat transfer rates and literature suggests that the cost for the recuperators may account for a significant portion of the total plant capital expenditure. When modelling the recuperator, most cycle comparative studies employ simplified recuperator models where heat exchanger effectiveness or conductance is utilised to approximate heat transfer. These models do not consider the effect of recuperator size and geometry on heat transfer and pressure drop in detail. In this work, for a concentrated solar power (CSP) application, the performance and component size requirements of the cycles are evaluated parametrically for different cycle mass flow split ratios, pressure ratios, and ratio of pressure ratios across the compressors using detailed discretised one-dimensional (1D) recuperator models. Furthermore, the geometry of these models are optimised (by volume) for straight and zigzag channel printed circuit heat exchangers (PCHEs), widely accepted as the most suitable for this application. Finally, a high-level cost comparison is conducted. The results show that if appropriate pressure drop assumptions are made, a simplified model approach yields valid cycle level results when compared with the results obtained using detailed models which consider practical recuperator geometry. However, the pressures and temperatures within the recuperator may not be predicted to a sufficient level of accuracy. In addition to providing clarity regarding the interplay between key cycle process parameters and cycle performance, straight channel PCHEs provide better thermofluid performance than zigzag channel PCHEs. Furthermore, the RCICRH cycle requires larger turbomachinery and a marginally higher capital outlay for the power cycle, but offers superior thermal efficiencies and requires smaller heat exchangers. For sCO 2 -CSP applications employing dry cooling, this suggests that the RCICRH cycle requires a smaller solar field and cooling system, and may therefore offer increased revenue in adverse weather conditions where direct normal irradiance (DNI) is low and/or ambient temperatures are high. However, the PCRH cycle requires a smaller solar receiver system, a smaller thermal energy storage (TES) system, and smaller turbomachinery, the cost savings of which may outweigh the benefits of the RCICRH cycle.

Efficient turbomachinery layout design and performance comparison of supercritical CO2 cycles for high-temperature concentrated solar power plants under peak-shaving scenarios

Novel Design Optimization of Concentrated Solar Power Plant with S-CO2 Brayton Cycle Based on Annual Off-Design Performance

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

Design Optimization and Operating Performance of S-CO 2 Brayton Cycle under Fluctuating Ambient Temperature and Diverse Power Demand Scenarios

Review of Supercritical CO2 Power Cycles Integrated with CSP

Load Matching and Techno-Economic Analysis of CSP Plant with S–CO2 Brayton Cycle in CSP-PV-wind Hybrid System

Capacity optimization and performance analysis of wind power-photovoltaic-concentrating solar power generation system integrating different S-CO 2 Brayton cycle layouts

Off-design optimization for solar power plant coupling with a recompression supercritical CO2 Brayton cycle and a turbine-driven main compressor

Design and performance analysis of compressor and turbine in supercritical CO2 power cycle based on system-component coupled optimization

Thermo-Economic Optimization Of Supercritical Co2 Brayton Cycle On The Design Point For Application In Solar Power Tower System

Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems

Optimal selection of supercritical CO2 Brayton cycle layouts based on part-load performance

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Part-load Performance Analysis and Comparison of Supercritical CO2 Brayton Cycles

Integration design and control strategy of sCO 2 Brayton cycle for concentrated solar power system

Study on the dynamic characteristics of a concentrated solar power plant with the supercritical CO2 Brayton cycle coupled with different thermal energy storage methods

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

Thermodynamic analysis of supercritical Brayton cycles using CO2-based binary mixtures for solar power tower system application

Comparing the partial cooling and recompression cycles for a 50 MWe sCO 2 CSP plant using detailed recuperator models

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy