Abstract:Abstract As the supercritical CO2 power cycle develops and the component technologies mature, there is still a need to reduce the associated capital and operating costs to maintain a competitive levelized cost of electricity (LCOE) in order to enter the market. When considering concentrating solar power (CSP) coupled with an sCO2 power block and sensible thermal storage, the technology presents a clean source for utility-scale power generation to support baseload or peak-load electrical demand. However, the LCOE of the technology is still considered higher than the competing technologies and should be reduced to better compete in the market; 2030 targets for dispatchable solar plants are 5¢/kWh for baseload CSP and 10¢/kWh for peaker plants, as set by the United States Department of Energy. In response to this need, this study is targeting improvements in the power cycle precooler to reduce power block contribution to LCOE. This study considers a dry cooler, as CSP plants are sensitive to water consumption because many installations are slated for remote or arid locations where solar irradiance is very high, but water is scarce. Furthermore, the power block footprint for an sCO2 system is quite compact, especially as compared to a steam cycle. Therefore, there is interest in installing a more compact dry cooler that is proportional to the reduced footprint sCO2 power block, while conventional dry coolers are an order of magnitude larger. The competing goals of size, performance, and cost were considered in this study to develop a compact dry cooler that can easily be packaged with the power block, significantly reducing the installation and transport cost compared to the current state of the art, while maintaining or improving upon the heat transfer performance and impact on plant LCOE. This paper details the high-level findings of a large dry cooler sensitivity study for design point selection, design of the compact dry cooler, expected year-round performance for the dry cooler and the power cycle, and the predicted LCOE for a 30-year plant life. It was found that an aluminum heat exchanger core can be suitably designed to meet the pressure and temperature requirements for a precooler in an sCO2 recompression Brayton cycle. The dry cooler assembly was found to have improved heat transfer performance, allowing for increased cycle efficiencies and a reduced plant LCOE. When coupled with a centrifugal blower and compact transition duct, the dry cooler assembly was able to reduce the installation footprint by over 50%.

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

Efficient turbomachinery layout design and performance comparison of supercritical CO2 cycles for high-temperature concentrated solar power plants under peak-shaving scenarios

Integration design and control strategy of sCO 2 Brayton cycle for concentrated solar power system

Control of Supercritical CO2 Brayton Cycle for Fast and Efficient Load Variation Processes

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications

Development of Operation Strategy for Recompression Supercritical CO2 Cycle with Intercooled Main Compressor under Off-Design Condition

A Review of Control Strategies for Supercritical Carbon Dioxide Brayton Cycle

Investigation of Thermodynamic Performances of Particle/supercritical CO2 Fluidized Bed Heat Exchanger Integrated with Supercritical CO2 Recompression Brayton Cycle for Concentrated Solar Power

Review of Supercritical CO2 Power Cycles Integrated with CSP

Study on the dynamic characteristics of a concentrated solar power plant with the supercritical CO2 Brayton cycle coupled with different thermal energy storage methods

Investigation of Thermodynamic Performances of Particle/supercritical CO2 2 Fluidized Bed Heat Exchanger Integrated with Supercritical CO2 2 Recompression Brayton Cycle for Concentrated Solar Power

Novel Design Optimization of Concentrated Solar Power Plant with S-CO2 Brayton Cycle Based on Annual Off-Design Performance

Design Optimization and Operating Performance of S-CO 2 Brayton Cycle under Fluctuating Ambient Temperature and Diverse Power Demand Scenarios

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy

Study on Control Strategies of the MW-scale Supercritical CO2 Recompression Brayton Cycle for Lead-Cooled Fast Reactor

Parametrized Analysis and Multi-Objective Optimization of Supercritical CO2 (S-CO2) Power Cycles Coupled with Parabolic Trough Collectors

Thermo-Economic Optimization Of Supercritical Co2 Brayton Cycle On The Design Point For Application In Solar Power Tower System

Capacity optimization and performance analysis of wind power-photovoltaic-concentrating solar power generation system integrating different S-CO 2 Brayton cycle layouts

Dynamic Modeling and Characteristic Analysis of Sco2 Brayton Cycle System

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application