Abstract:Increasing demand of electricity and severer concerns to environment call for green energy sources as well as efficient energy conversion systems. SCO2 power cycles integrated with concentrating solar power (CSP) are capable of enhancing the competitiveness of thermal solar electricity. This article makes a comprehensive review of supercritical CO2 power cycles integrated with CSP. A detailed comparison of four typical CSP technologies is conducted, and the cost challenge of currently CSP technologies is pointed out. The thermophysical properties of sCO(2) and the corresponding two real gas effects are analyzed elaborately to express the features of sCO(2) power cycles. An extensive review of sCO(2) layouts relevant for CSP including 12 single layouts and 1 combined layout is implemented logically. Strengths and weaknesses of sCO(2) power cycles over traditional steam-Rankine cycle generally adopted in current CSP plants are concluded, followed by metal material degration summary in CSP relevant temperature sCO(2) environment, which shows that the nickel-based alloy is a proper structural material candidate for sCO(2)-CSP integration. Thermodynamic analyses of sCO(2) power cycles when integrated with CSP are divided into three level of which design-point analysis and off-design modeling are conducted and compared, more researches into the off-design point analysis, dynamic modeling, especially the transient behavior are suggested. Economic analysis of the integrated system is concluded and presents a considerable levelized cost of electricity reduction of 15.6% to 67.7% compared to that of state of art CSP. Taking the thermodynamic and economic analysis into consideration, target designs of sCO(2) power cycles for CSP are summarized in three aspects. Finally, current theoretical and experimental researches of sCO(2) power cycles integrated with CSP for market penetration are introduced. The strengths, weaknesses, and potential solutions to the gaps of three potential pathways (molten salt pathway, particle pathway, and gas phase pathway) to realize the integration of sCO(2) power cycles in the next CSP generation plants up to 700 degrees C are reviewed. In general, the integration of sCO(2) power cycles with CSP technologies exhibits promising expectations for facilitating the competitiveness of thermal solar electricity.

Comprehensive analysis of combined power cycles driven by sCO 2 -based concentrated solar power: Energy, exergy, and exergoeconomic perspectives

Small-scale concentrated solar power system with thermal energy storage: System-level modelling and techno-economic optimisation

Thermo-Economic Analyses and Comparisons of Two S-CO2-Brayton-Cycle-Based Combined Power Cycles for Concentrated Solar Power Plants

Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems

Review of Supercritical CO2 Power Cycles Integrated with CSP

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

Sustainable Power Generation Through Solar-Driven Integration of Brayton and Transcritical CO2 Cycles: A Comprehensive 3E (Energy, Exergy, and Exergoenvironmental) Evaluation

Thermodynamic Analysis of a Combined Recompression Supercritical Carbon Dioxide Brayton Cycle With an Organic Flash Cycle for Hybrid Solar-Geothermal Energies Power Generation

Assessment of a sustainable power generation system utilizing supercritical carbon dioxide working fluid: Thermodynamic, economic, and environmental analysis

Integration design and control strategy of sCO 2 Brayton cycle for concentrated solar power system

Sensitivity analysis and exergoeconomic optimization of an improved He-CO 2 cascade Brayton cycle for concentrated solar power

Thermodynamic assessment of a cogeneration system with CSP Driven-Brayton and Rankine cycles for electric power and hydrogen production in the framework of the energy and water nexus

Load Matching and Techno-Economic Analysis of CSP Plant with S–CO2 Brayton Cycle in CSP-PV-wind Hybrid System

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications

An Exergoeconomic Evaluation of an Innovative Polygeneration System Using a Solar-Driven Rankine Cycle Integrated with the Al-Qayyara Gas Turbine Power Plant and the Absorption Refrigeration Cycle

Mapping the techno-economic potential of next-generation CSP plants running on transcritical CO 2 -based power cycles

Multi-objective optimization and 4E analyses of the solar energy assisted direct-heated sCO2 power cycle for low-temperature applications

Viability Assessment of a Concentrated Solar Power Tower With a Supercritical CO2 Brayton Cycle Power Plant

Performance Comparison of SPT Systems Integrated with Various Supercritical CO2-based Mixture Brayton Cycles Based on Multi-Objective Optimization

Optimal Integration of Recompression Supercritical CO2 Brayton Cycle with Main Compression Intercooling in Solar Power Tower System Based on Exergoeconomic Approach

Comparative and Optimal Study of Energy, Exergy, and Exergoeconomic Performance in Supercritical CO2 Recompression Combined Cycles with Organic Rankine, Trans-Critical CO2, and Kalina Cycle